Product Details

Overview:

The Samson  AirLine 77 UHF Guitar System offers a true wireless experience with no beltpacks or cables, allowing total freedom of mobility. The system includes either a Gibson® (AG1) or a Fender® (AF1) style transmitter that plugs into your guitar or bass, along with the CR77 receiver.

Components:

CR77 True Diversity Receiver

• The CR77 true-diversity half-rack UHF receiver is at the core of the system.
•  A synthesized PLL frequency control circuitry keeps the signal locked and true while dual tuned molded antennas with LEDs monitor the true-diversity operation.
• The CR77 features a front panel display with large multi-segment audio level and RF level LED meters, and a large rotary volume knob allows easy adjustment of audio output. Its rear panel features balanced XLR and unbalanced 1/4-inch outputs allowing flexible connection options.
•  Where two wireless systems are required, two CR77 receivers can be rackmounted together in a single-space rack adapter available as an additional accessory.
• With the Concert 77 Presentation System, advanced technology and total convenience combine to provide professional wireless performance wherever you need it.

The Samson CR77 Wireless Microphone Receiver is paired with a number of Samson transmitters, such as the Airline and Concert series. The true-diversity UHF receiver features 1/4" phone and XLR output connections. True-diversity reception and PLL synthesized tuning result in reliable reception without noise and artifacts. Additional features include dual antennas, XLR and 1/4" phone output connectors, RF level LED meters, and a large output volume control dial. 

• XLR and unbalanced 1/4-inch outputs with mic/line level output switch
• True diversity UHF wireless headset system with PLL frequency control
• CR77 receiver features multi-segment audio level and RF level LED meters, squelch and volume control
• AC adapter and 1/4-inch to 1/4-inch cable included 

With AirLine Wireless, you get complete wireless freedom that's good to go anywhere the music takes you.

CR77 Front Panel Features:

1.) Antennas ( A and B ) - The antenna mounting allow rotation for optimum placement.

2.) Volume Control - This knob sets the level of the audio signal being output through both the balanced and unbalanced output jacks on the rear panel.

3.) Audio Meter - This "ladder" display indicates the strength  of the incoming audio signal.

4.) Squelch Control - This control determines the maximum range of the CR77 before audio signal dropout.

5.) A/B AntennaLED'S - When signal is being received,one of these will be lit green,showing you whether the (left) "A" or (right) "B" antenna is currently being used.

6.) RF (Radio Frequency) Level meter - This "ladder" display indicates the strength of the incoming radio signal.

7.)  Power Switch - Use this to turn the CR77 power on or off.

CR77 Rear Panel Features:

1.) DC Input - Connect the supplied 12 volt 160mA power adapter here using the strain relief.

2.) Balanced Output* - Use this electronically balanced low impedance (600-Ohm) XLR jack when connecting the CR77 to professional (+4) audio equipment.

3.) Audio Output Level Switch - Sets the audio output level attenuation of the balanced output to -20 dBm (line level) or -40 dBm (mic level.)

4.) Unbalanced Output* - Use this unbalanced high impedance (5K Ohm) 1/4" jack when connecting the CR77 to consumer (-10) audio equipment.

AG1 Airline Guitar Transmitter

With the AirLine Wireless Guitar System, you get complete wireless freedom that's good to go anywhere the music takes you.

•  AG1 and AF1 AirLine Guitar transmitters plug directly into the jack of the guitar with no cables running to a pack.
•  The AG1 is a 90-degree plug suitable for most popular straight angle jacks while the AF1 plugs in at a 45-degree angle for body mounted recessed jacks.
• Both offer complete wireless freedom with no beltpacks and solid UHF performance.
• All of the AirLine transmitters operate on inexpensive and lightweight AAA batteries that offer 14 hours of operation on a single battery. 

1: Plug - Insert this standard 1/4” plug into your electric guitar or electric bass. Note that the angling of the plug is different in the AF1 (which is designed to be used with instruments that have Fender Stratocaster™-type recessed jacks) than in the AG1 (which is designed to be used with all other instruments that have end mount-jacks).

2: Power / Battery LED - This LED flashes once when the AF1 or AG1 is first turned on and lights steadily red when there are less than 2 hours of battery power remaining, indicating that the battery needs to be changed. In order to avoid compromising audio fidelity (or having the AF1 / AG1 stop working completely), you should always replace the battery with a fresh one immediately whenever this LED lights red

3: 15 dB Pad - Move this switch in the direction of the arrow to reduce the output of the AF1 or AG1 by 15 dB when your instrument is putting out too hot a signal

4: Power switch - Move this switch in the direction of the arrow to turn power to the AF1 or AG1 on; move it away from the arrow to turn power off.

5: Antenna - This permanently attached flexible antenna should be fully extended during normal operations.

6: Battery cover - Pull back gently on this cover at the ribbing and pry upwards to remove.

7: Battery compartment - Insert a standard AAA alkaline battery here, being sure to observe the plus and minus polarity markings shown. We recommend the Duracell type battery. Although rechargeable Ni-Cad batteries can be used, they do not supply adequate current for more than four hours. WARNING: Do not insert the battery backwards; doing so can cause severe damage to the AF1 / AG1 and will void your warranty.

General Features:

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry