Product Details

Overview

Over the past decade, the tight and transparent sound of Lab.gruppen touring amplifiers has earned the praise of renowned FOH engineers and leading sound rental companies worldwide. FP 14000, the new flagship model of the FP+ Series, advances this tradition by further augmenting effective power output to effortlessly handle extreme low-frequency loads.The Regulated Switch Mode Power Supply (R.SMPS) has been updated to provide more sustained high power during extended bursts of low frequency content, while at the same time ensuring stable rail voltages even with wide fluctuations of external mains voltage.

• The forceful, high-current (83 A peak) output stage relies on Lab.gruppen’s patented Class TD topology, a breakthrough in amplifier technology that approaches the efficiency of Class D while retaining the sonic purity of proven Class B designs. A highly refined and efficient circuit layout further optimizes the interaction of R.SMPS and Class TD to produce the unprecedented power density of the FP 14000.
• To keep its cool under extreme demands, the FP 14000 relies on Lab.gruppen’s proprietary Intercooler. This innovation uses thousands of copper fins to multiply the exposed heatsink surface’s rapid heat dissipation. Also, all output devices are mounted transverse to the airflow for uniform cooling. As a result, the FP 14000 delivers Lab.gruppen’s’ trademark “all the power, all the time” with no degradation of sonic performance.
• To maximize headroom in any application, the FP 14000 offers adjustable input gain along with Lab.gruppen’s exclusive Voltage Peak Limiter (VPL). Adjustable on a per-channel basis, VPL optimizes the output for any load, from a single massive subwoofer to a series of HF compression drivers.
• The comprehensive warning and protection features on the FP 14000 safeguard output circuits and connected loads while also extending amplifier life and minimizing the chance of service interuptions Whether it’s a matter of faulty wiring, improper use, or extreme ambient temperatures, the FP 14000 gives clear indication of any problems. Automatic protection measures engage only at critical thresholds. Operating conditions are re-checked every six seconds and, if a fault is detected, normal operation is resumed when measurements return to nominal.
• The FP 14000 is shipped with a NomadLink network interface as standard. In conjunction with DeviceControl software, NomadLink allows comprehensive monitoring of amplifier status (including fault or warning indications) and also enables remote control of power on/off, channel mute, and channel solo functions. NomadLink is compatible with popular third-party control platforms; a separate NLB 60E NomadLink Bridge & Network Controller is required.

Features:

• Unprecedented power density – The FP 14000 delivers a total of 14000 W (2 x 7000 W @ 2 ohms) in only 2U.
• Lab.gruppen sound quality – The FP 14000 is optimized for sustained performance into extreme low-frequency loads, yet it also maintains Lab.gruppen’s reputation for exceptionally smooth and transparent mid- and high-frequency response.
• NomadLink® network ready – Monitoring and control of key functions accessible via the intuitive DeviceControl software and the robust, daisy-chained NomadLink® network, as well as by the leading third party control platforms.
• Patented Class TD® amplifier topology – Road-proven output stage delivers Class B audio quality with Class D efficiency.
• Regulated Switch Mode Power Supply (R.SMPS™) – Output power remains constant even with significant drops in the mains voltage.
• Efficient cooling system – Unique, lightweight Intercooler copper cooling system dissipates more heat to allow extended peak output
• Adjustable parameters – Selectable Gain, scalable Voltage Peak Limiter (VPL™), and bridge-mode operation allow custom configuration for any system or application.
• XLR input and link connectors
• Heavy-duty binding posts
• Comprehensive protection and warning – Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start.

Specifications:

General

• Number of channels ............................................. 2
• Peak total output all channels driven .............14000 W
• Peak output voltage per channel ...................... 195 V
• Max output current per channel............................. 90 A peak

Max output power all channels driven

• 16 ohms.................... 1200 W
• 8 ohms .......................2350 W
• 4 ohms........................ 4600 W
• 2 ohms........................... 7000 W

Max output power bridged

• 16 ohms .......................4700 W
• 8 ohms.............................. 8800 W
• 4 ohms ..........................14000 W
• 2 ohms .......................The amplifier will be fully operational at bridge-mode 2 ohm loads, but due to physical constraints in the construction, the max. output power will not be significantly higher than running individual channels and therefore not stated here.

Performance

• THD 20 Hz - 20 kHz at 1W......................................... <0.1%
• THD at 1 kHz and 1 dB below clipping....................<0.05%
• Signal to Noise Ratio.................................................>112 dBA
• Channel separation (Crosstalk) at 1 kHz ..................>70 dB
• Input impedance .........................................................20 kOhm
• Output impedance @ 100 Hz ..................................19 mOhm

Gain, Sensitivity and Limiters

• VPL, selectable per ch...............................195, 170, 140, 116, 100, 80, 66, 54 V
• VPL, when bridged .......................................  390, 340, 280, 232, 200, 160, 132, 108 V
• Voltage Peak Limiter mode (per ch.) ..........Hard / Soft
• Amplifier gain selectable (all channels) – rear-panel switches ...........   23, 26, 29, 32, 35, 38, 41, 44 dB
• Default gain...................................................... 38 dB
• Level adjustment (per channel)......................... Front-panel potentiometer, 31 position detented from -inf to

Connectors and Buttons

• Input connectors (per ch.) ........................... 3-pin XLR, electronically balanced
• Output connectors (per ch.)..........................Neutrik speakON / binding post
• Output bridge mode ....................................... A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
• NomadLink network......................................On board, 2 x RJ45 connectors IN and OUT
• Intelligent fans (on/off).............................................. Yes, depending on presence of output signal
• Power on/off and Remote enable on/off .................... Individual switches on front-panel
• Cooling ......................................Dual fan, front to rear airflow, no filter required, temperature controlled speed

Front-panel user interface

• Common.............................. NomadLink Network; Power Average Limiter (PAL)5; Power on
• Per channel...........................Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute

Power

• Operating voltage, 230 V / 115 V nominal ............................130-265 V / 65 -135 V
• Minimum power-up voltage, 230 V / 115 V ............................171 V / 85 V
• 3  ...................................................................................................... Yes
• Soft-start / Inrush Current Draw ......................... Yes / max. 5 A
• Mains connector......................................... 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock

Dimensions

• Dimensions.............................W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)

Weight

• Weight............................. 12 kg (26.4 lbs)

Finish

• Finish ............................Black painted steel chassis with black painted steel / aluminum front

Approvals

• Approvals.....................CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

NOTES

1: Automatic -6 dB gain compensation when bridging channels.

2: Separate 230 V or 115 V versions available. Not selectable on the amplifier.

3: PAL can reduce the maximum output power to keep the power supply operating safely, and/or to prevent excessive current draw tripping the mains breaker. Refer to the FP+ Operation Manual section 7.5.8 Power Average Limiter (PAL) for more information.

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry