Product Details

Based on state-variable, constant-Q filters, the T1951 features four fully parametric stereo bands with center frequency, bandwidth and amplitude controls, plus the option to use the low- and high-frequency bands as shelving filters. In addition, you get 12AX7 tubes and our ULTRA-TUBE circuitry, enabling you to selectively add tube warmth to your EQ’d signal.

Product Features:

• 4-band stereo parametric equalizer with hand-selected 12AX7 tubes
• UTC - Ultra Tube Circuitry adds precise dosage of desired tube effect *
• Parallel filter architecture ensures minimal phase shift
• Precision state-variable filters with constant-Q characteristic
• Switchable shelving filter functions remove unwanted frequencies
• Each band can be bypassed and is fully adjustable from notch filter to broadband equalization
• Broad frequency band overlapping allows extreme boost/attenuation
• Relay-controlled hard bypass with auto bypass function in case of power failure
• Servo-balanced inputs and outputs on gold-plated XLR and TRS connectors for highest signal integrity
• Shielded toroidal power transformer for ultra low-noise performance
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

The BEHRINGER TUBE ULTRA-Q has four parametric filters organized in 4 different frequency bands. A backlit VU meter shows the input or output level. Each channel comes with a Warmth control and a tube window.

1.)The INPUT control determines the input level applied to the device and can be set within a range from -15 to +15 Db.

2.) When the PEAK LED above the INPUT control lights up, it means that a level of at least 18 dBu is present after the input stage. Adjust the INPUT control so that the PEAK LED lights up only with signal peaks make sure that it never lights up all the time. When the PEAK LED is on, there is still some 5 Db of headroom left.

3.)The IN/OUT switch is used to enable/disable the entire equalizer section in the audio path. The switch uses a relay-controlled hard bypass function. i.e. as long as it is not active or if the unit is switched off, the inputs are directly connected to the outputs. The IN/OUT switch allows for A/B comparisons between processed and unprocessed signals.

4.)The FREQUENCY control selects the filter’s center frequency, which can be freely chosen within the frequency range of the associated band.

5.)The LEVEL control determines the amount of level boost/cut.

6.)The BANDWIDTH control determines the slope or quality of the filter.

7.) With the SHELF/PEAK switch the two outer bands can be switched from parametric (peaking response) EQ to low and high pass (shelving EQ) filters respectively.

8.)The individual IN/OUT switches allow for enabling/disabling specific bands in the audio path. Use this switch to check the influence of the separate filters and to switch unused filters off for maximum signal integrity.

9.)The WARMTH control determines the amount of harmonics the UTC circuit adds to the signal.

10.)The WARMTH meter displays the amount of added harmonics. This controls the amount of harmonics, or tube sound (“WARMTH”), the UTC circuit adds to the signal.

11.)Use the POWER switch to turn the TUBE ULTRA-Q on or off. When switched of the TUBE ULTRA-Q automatically switches to a hard bypass mode, the signal is then led directly to the outputs.

12.)SERIAL NUMBER..Please complete and return the warranty card within 14 days of the date of purchase.

13.)FUSE HOLDER /VOLTAGE SELECTION. Before connecting the T1951, confirm that the voltage display matches your local mains voltage.

14.)AUDIO IN. These are the audio inputs of your TUBE ULTRA-Q .Matching ¼” TRS and XLR connectors are wired in parallel.

15.)AUDIO OUT. These are the audio outputs of your TUBE ULTRA-Q. Matching ¼” TRS and XLR connectors are wired in parallel.

The TUBE ULTRA-Q splits up the audio signal applied at the input and processes it differently for both signal paths.Each of the two tube halves amplifies the original signal and the signal modified in its phase spectrum (twin triode).Additional harmonics are produced by slightly overdriving the tube stage.When the two signals are processed by the UTC circuit,the interference noise found in conventional tube circuits can be largely eliminated and the actual tube effect be added gradually.The more you turn the Warmth control to the right,the more tube sound will be added to the original signal.

Specifications

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry