Product Details

Overview:

With the Stage 5H, Samson has provided a perfect wireless solution for any presentation or performance application.

• The Stage 5H System provides incredible reception and crystal clear sound at a price-point previously unavailable.
• The half-rack VHF receiver offers variable squelch, six-segment LED RF level, audio level metering, a front mounted antenna as well as XLR and 1/4-inch outputs.
• The transmitter also offers a battery level meter and an audio on/off switch.
• The system includes the HT5 handheld microphone transmitter coupled with a Samson H5 dynamic mic element to ensure lucid, accurate vocal reproduction. And since the transmitter is built right into the body of the microphone, there's no need for a beltpack.

Thanks to the affordability of the Stage 5H, the freedom of wireless becomes available to anyone who needs it. From the presenter looking to shed the restraints of cords and wires to the singer looking to add energy and movement to any performance, the Stage 5H provides a professional-grade experience at a price that lets anyone enjoy the freedom of wireless.

System Features:

• Great RF reception for interference-free performance
• Half-rack VHF receiver design
• Dual conversion design and onboard noise reduction
• XLR and 1/4-inch outputs
• 1/4-inch to 1/4-inch cable included
• Easy to read battery and signal level meters
• HT5 operates for 10 hours on single 9-volt battery (included)
• AC adapter included

The SR5 receiver provided with the STAGE 5 Series wireless system utilizes crystal controlled, PLL (Phase Lock Loop), Single Conversion Superheterodyne circuity for clear and reliable reception. The antenna has been specially designed and tuned for the specified frequency band. Finally, the provision of a noise reduction circuit produces crystal-clear sound with minimized background noise and hiss.

1: Antenna - The antenna mounting allows full rotation for optimum placement. In normal operation, the antenna should be placed in a vertical position. It also can be folded inward for convenience when transporting the SR5.

2: Volume control - This knob sets the level of the audio signal being output through both the balanced and unbalanced output jacks on the rear panel. Reference level is obtained when the knob is turned fully clockwise.

3: Audio Meter - This “ladder” display (similar to the VU bar meter used on audio devices) indicates the strength of the incoming audio signal. When the “0” segment is lit, the incoming signal is optimized at unity gain; when the “+6” segment is lit, the signal is overloading. When only the left-most “-20” segment is lit, the incoming signal is at just 10% of optimum strength. If no segments are lit, little or no signal is being received.

4: Squelch control - This control determines the maximum range of the SR5 before audio signal dropout. Although it can be adjusted using the supplied plastic screwdriver, it should normally be left at its factory setting.

5: “TX” LED - Lights when carrier signal of sufficient strength is being received by the SR5.

6: RF Meter - This “ladder” display (similar to the VU bar meter used on audio devices) indicates the strength of the incoming radio signal. When the “100%” segment is lit, the incoming RF signal is fully modulated and at optimum strength. When only the second most left-most “10%” segment is lit, the incoming signal is at just 10% of optimum strength. If no segments are lit, little or no signal is being received.

7: Power switch - Use this to turn the SR5 power on and off

1: DC input - Connect the supplied 12 volt, 500 mA power adapter here,

2: Balanced output* - Use this electronically balanced low impedance (600 Ohm) XLR jack  when connecting the SR5 to professional (+4) audio equipment. Pin wiring is as follows: Pin 1  ground (shield), Pin 2 high (hot), and Pin 3 low (cold). (* If required, both the unbalanced and balanced outputs can be used simultaneously)

3: Audio Output Level switch - Sets the audio output level attenuation of the balanced output to -20 dBm (line level) or -40 dBm (mic level).

4: Unbalanced output* - Use this unbalanced high impedance (5K Ohm) 1/4" jack when connecting the SR5 to consumer (-10) audio equipment. Wiring is as follows: tip hot, sleeve ground.(* If required, both the unbalanced and balanced outputs can be used simultaneously)

HT5 Handheld Transmitter:

1: Audio on-off switch - When set to the “on” position, audio signal is transmitted. When set to the “off” position, the audio signal is muted. Because the carrier signal remains during muting, no “pop” or “thud” will be heard. Note that turning this off does not turn off the transmitter power—it is simply a way to temporarily mute the transmission of audio signal. If you don’t plan on using the HT5 for extended periods, turn off its power by using the power on-off switch

2: Battery level meter - This set of three multicolor LEDs indicates relative battery power, indicating whether the installed battery is at low (red), mid (yellow) or high (green) strength. One or more of these will light whenever the HT5 is powered on. When all three are lit, the battery is at maximum strength. When only the red “low” indicator lights, RF performance is degraded and the battery needs to be replaced.

3: Power on-off switch* - Use this to turn the HT5 on or off (to conserve battery power, be sure to leave it off when not in use).

4: Gain control (trimpot) - This input sensitivity control has been factory preset to provide optimum level for the particular microphone capsule provided with your Stage 5 Series system and so we recommend that this not be adjusted manually. If necessary, however, you can use the supplied plastic screwdriver to raise or lower the input level.

5: Battery holder - Insert a standard 9-volt alkaline battery here, being sure to observe the plus and minus polarity markings shown. We recommend the Duracell MN 1604 type battery. Although rechargeable Ni-Cad batteries can be used, they do not supply adequate current for more than four hours. WARNING: Do not insert the battery backwards; doing so can cause severe damage to the HT5 and will void your warranty.

* Be sure to mute the audio signal at your external mixer or amplifier before turning transmitter power on or off, or an audible pop may result.

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry