Product Details

Overview:

Soavo-900SW Advanced YST II Front Firing Subwoofer

• The Soavo-900SW Subwoofer meets the challenge of providing an ideal balance between tight sounds (with crisp, fast attack) and deep sounds (with a spacious feeling). Designed for extremely accurate music reproduction, the Soavo-900SW proudly takes its place in Yamaha's Soavo series.

Advanced YST II

• Yamaha's Advanced YST II (Yamaha Active Servo Technology II) combines negative-impedance and constant-current principles to drive the speaker cone with extremely tighter control. Using Advanced Negative Impedance Converter (ANIC) circuits, this system dynamically optimizes effective speaker impedance to maintain excellent linearity. This means more stable and accurate low range response, not to mention higher sound pressure levels. This means more stable and accurate low range response, higher sound pressure levels, and the ability to reproduce clear bass without muddiness.

High Performance Driver

• The 25cm (10”) cone driver uses a new Yamaha-developed material consisting of paper with a blend of carbon fibers and aramid fibers. Its extreme stiffness and extra-long stroke prevent distortion from occurring even during large, deep bursts of sound. A large, powerful magnetic circuit also contributes to the driver’s fast response. The unit is firmly supported by a strong diecast aluminium frame.

600W Digital Amplifier

• The Soavo-900SW has a high-end audio component built in! — its 600W digital amplifier. Featuring Yamaha’s exclusive Power Engine chipset, it uses a constant gain PLL modulator circuit, a cross feedback loop circuit, an Active Power Control system, a highly efficient power supply and the highest quality parts. It delivers exceptionally high levels of power and sound quality, yet with low power consumption and compact size.

Front Firing Design

• The front firing design ensures extremely fast response and attack, and is especially suited to the accurate reproduction of music.

Twin Wooden Linear Ports

• The wooden ports are carved from a block of alder wood and aesthetically match the enclosure, the twin ports provide more port area without increasing the subwoofer’s size, as one large port would do. The shape is based on a natural logarithm to prevent extraneous wind noise.

Heavy-Duty Construction with Three-Way Mitered-Joint Construction

• The Soavo-900SW employs three-way mitered-joint construction at the cabinet corners and baffle/body connections to increase the tightness of the joints so the entire cabinet behaves as a single unit. This improves low frequency response and reduces unwanted vibration. A thick baffle (37mm; 1-1/2”) also minimizes vibration, adding to the overall benefits of the stiff cabinet construction.

Birch Veneer Cabinet with Open-Pore Finish

• Birch is an acoustically excellent material that is used in Yamaha pianos. Yamaha’s long decades of woodworking expertise have confirmed the superior performance of birch veneer for speaker cabinets, particularly in the shading of bass sounds. The cabinet is given the same luxurious and environmentally friendly (non-PVC) open-pore finish used on Yamaha’s finest wood-grain pianos. Embedded switches also show the scrupulous care that Yamaha has taken in designing this subwoofer.

Three BASS Modes

• The BASS (Bass Action Selector System) function provides a selection of three modes to match the source being listened to. Wide for powerful sound with movies, Normal for natural sound with music and movies, and Narrow to cut unnecessary bass from music sources to enjoy clearer sound quality.

Full-Function Remote Control Unit

• The remote unit makes it convenient to operate the subwoofer. It lets the user turn the power on and off, adjust the volume, adjust the high cut filter, select phase (normal/reverse), select BASS mode, engage the sleep timer and set and select the preset memories.

Three Preset Memories

• Three combinations of settings (volume, BASS, high cut filter and phase) can be memorized and recalled at the touch of a button on the remote unit.

Sleep Timer

• Engaging the sleep timer shuts off the power after two hours. This is both handy and energy-saving, because people often forget to turn off their subwoofer.

Features:

Powerful, Accurate Sound

• The Soavo-900SW is offered with dark brown, brown birch, natural birch, or black finish.
• Not all finishes are available in all areas.
• Advanced YST II (Yamaha Active Servo Technology II)
• New 10" (25cm) F.B.P. (Fiber Blend Paper) diaphragm with diecast aluminum frame
• 600W high performance digital amplifier built in
• Twin wooden Linear Ports

Cabinet

• Heavy-duty construction
• Birch veneer cabinet with piano-quality open-pore finish

Convenient Features

• Three BASS (Bass Action Selector System) modes
• Three memory presets
• Continuously variable high cut filter
• Full-function remote control unit
• Sleep timer

Other Notable Features

•  Continuously variable high cut filter (40 – 140Hz)
•  LFE terminal (bypasses the high cut filter)
•  Power can be turned on and off using a Yamaha receiver/amp remote unit
•  Remote controllable motor-driven volume control
•  Low power consumption with standby power of 0.5W
• Gold-plated terminal
•  Frequency response: 18 – 160Hz
• Heavy construction: 32kg (70.1lbs.)

1. Remote control sensor - Receives signals from the remote control.

2. STANDBY/ON indicator - Green: Lights up when this unit is on. / Red: Lights up when this unit is in the standby mode. / Orange: Lights up when the sleep timer is on.

3.PHASE indicator - Green: Lights up when the phase is set in the reverse mode. / Red: Lights up when the phase is set in the regular mode.

4. STANDBY/ON switch - Turns on or sets this unit to the standby mode. In the standby mode, this unit consumes a small amount of power.

5. H-CUT control - Adjusts the high frequency cut off point depending on the connected front speakers or your preference

6.VOLUME control - Adjusts the volume level. Turn the control clockwise to increase the volume, counterclockwise to decrease the volume.

7. B.A.S.S. indicators - Light up to indicate the currently selected B.A.S.S. number (1, 2 or 3)

8. PRESET indicators - Light up to indicate the currently selected PRESET number (1, 2 or 3

Rear Panel Features:

1.GND Terminal

2. INPUT 3 Terminals

3.INPUT 2 (LFE) Terminals

4. OUTPUT Terminals

5.INPUT 1 Terminals

6. AC IN

7. POWER Switch

Remote Control Features:

1. STANDBY  - Sets this unit to the standby mode. In the standby mode, this unit consumes a small amount of power.

2. POWER - Turns on this unit

3 .B.A.S.S. - Selects a mode that is suitable for the source.Each time you press B.A.S.S., the B.A.S.S. indicator changes between 1, 2, and 3.

4. PRESET - Stores or recalls the B.A.S.S., volume, high-cut frequency  and phase settings

5. HIGH CUT - Adjusts the high frequency cut off point depending on the  connected front speakers or your preference

6. SLEEP - Sets the sleep timer

7. PHASE - Switches the phase mode.Normally, set this unit to the reverse position. However,  according to your speaker systems or the listening condition, there may be cases when better sound quality is obtained by setting this switch to the normal position. Select the better position by monitoring the sound.

8. MEMORY- Stores the B.A.S.S., volume, high-cut frequency and phase  settings

9.VOLUME - Adjusts the volume of this unit.

When your amplifier has a one-channel subwoofer terminal

Connect the subwoofer (or low pass etc.) terminal of your amplifier to the INPUT 3 ( /MONO) terminal of this unit  using a commercially available mono pin cable.

When your amplifier has two-channel subwoofer terminals

■Using one subwoofer

Connect the “L” side subwoofer terminal of your amplifier to the INPUT 3 ( /MONO) terminal of this unit and “R” side subwoofer terminal of your amplifier to the INPUT 3 ( ) terminal of this unit using a commercially available audio pin cable

■Using two subwoofers

Connect the “R” side subwoofer terminal of your amplifier to the INPUT 3 ( ) terminal on this unit using a commercially available mono pin cable, and connect the “L” side subwoofer terminal of your amplifier to the INPUT 3 ( /MONO) terminal of this unit using a commercially available mono pin cable

When your amplifier has one set of front speaker terminals

• Connect the speaker terminals of the amplifier to the INPUT 1 terminals of this unit, and connect the OUTPUT terminals of this unit to the front speakers using a commercially available speaker cable.

When your amplifier has two sets of front speaker terminals and both terminals can output sound signals simultaneously

Connect one set of front speaker terminals of the amplifier to the INPUT 1 terminals of this unit, and connect another set of front speaker terminals of the amplifier to the front speakers using commercially available speaker cables.Set the amplifier so that both sets of front speaker terminals output sound signals simultaneously.

Specifications:

• Type .... Advanced Yamaha Active Servo Technology II
• Driver ...................................... 25 cm (10”) cone woofer Magnetic shielding type
• Amplifier Output (100 Hz, 4 ohms, 10% T.H.D).......................... 600 W
• Frequency Response ............................. 18 Hz - 160 Hz

Power Supply

• U.S.A. and Canada models ............. AC 120 V, 60 Hz
• U.K. and Europe models ................ AC 230 V, 50 Hz
• Australia model .............................. AC 240 V, 50 Hz
• Asia and General models......... AC 110/120/220/230-240 V, 50/60 Hz
• Korea model ................................... AC 220 V, 60 Hz
• China model ................................... AC 220 V, 50 Hz
• Power Consumption ........................................... 180 W
• Standby Power Consumption ............................. 0.5 W
• Dimensions (W x H x D)........................ 410 mm x 457 mm x 462 mm / (16-1/8” x 17” x 18-3/16”)
• Weight ............................................. 32 kg (70 lbs. 9 oz.)
• Color...........................................Black

Note: Please note that all specifications are subject to change  without notice.

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry