LWA 1000

Current Page

LWA 1000

(International shipping available)

Basic Information
Product Name	LWA 1000
Brand	WARWICK
Sale Price	Php 54,000.00
Mileage	Points :540.00
수량
Product Code	P0000IBF
Product Details	Bass Amplifier Head (1,000W)
QR Code

Product promotion via SNS
Product promotion via SNS

To use or earn Naver Mileages, please check out through personal payment window.

Product Option

Shipping Cost Payment Options:
1."To be Paid on Delivery" Shipping is still limited to some areas in Visayas and Mindanao via AP Cargo.Shipping Cost may be paid by cash to courier (door-to-door) or upon branch pick-up. Service may expand nationwide in the nearfuture;
2."Pre-pay" Shipping covers countrywide (Philippines). Shipping cost needs to be settled with the item cost prior to shipping of the package.
Product Availability:
Some products are provided on a per order basis and could take 3-5 weeks to be available upon order.Kindly inquire for the availability of the items.

(Minimum Order : 1 or more / Maximum Order 0 or less)

Size Charts

information Select quantity.

information To add product, select an option in the above option box.

Product List
Name	Quantity	Price
LWA 1000		( 540)
Total(Quantity) : 0 (0 item)

Product Details

Overview:

Warwick's first entry into the field of lightweight Bass Amps is the 1000W WARWICK LWA1000. This convenient package of 2 input channels with full Eq section and compressor on each channel combined with a power amp stage that is designed using the latest advances in so called Class D technology gives you a chameleon that can be used in pretty much any situation.

The configuring of the Amp to give 500W at 8 Ohms and 1000W at 4 Ohms makes it possible to have the power you need for the gig regardless of the size of the venue. The 2 inputs lets you have 2 Basses plugged in and ready to go with their own unique settings already dialed in.
The Pre amp is based on Warwick signature Class A/Low Z circuitry made famous with the WA and BC series of amps.
This technology makes sure you have the warm huge distortion free sound you desire without disturbing noise.
The advancement in Power supply technology and error correction circuitry in the Class D power amp used in the LWA 1000 allows for tighter and stronger bass response than previously possible in this type of amps. Making it comparable in sound to much heavier Class A/B amps.

Here is a short description of the underlying design concepts:

CLASS A OPERATION

Class A amplifiers are typically more linear and as such are less complex than other amplifier classes. In Class A amplifiers, the amplification circuitry is designed so that it is always conducting electrical current. This means that the active elements are always on, thus avoiding the problem of crossover distortion.

LOW-Z CIRCUITRY

Thermal noise is a critical design issue when it comes to audio electronics. By lowering the impedance of components inside an electronic circuit, the overall thermal noise is substantially reduced. The Low-Z circuitry inside all of our amplifiers makes it possible to achieve consistently noise-free operation.

Front Panel Features:

1. Input jack – Accepts a standard 6.25mm (1/4”) audio jack for connecting active or passive basses using a properly shielded cable.

2. Gain – Adjusts the input gain of the preamp stage.

3. Signal Level LED – This LED, when green indicates that the input is at least 0dBU (0.77V RMS). When red, it indicates clipping in the preamp stage. If the preamp is clipping, turn down the gain on some of the preamp stage controls (Gain, EQ or Compression as applicable).

4. Mute ON/OFF – Engaging this switch will mute all outputs except for the Tuner Out. When not engaged, the respective channel is activated.

5. Mute LED – Indicates Mute status. Red indicates channel is muted (Mute ON), green indicates channel is active (Mute OFF).

6. Equalizer – 4-Band EQ provides +/- 12 dB of gain for each band.

BASS – 100Hz
LOW MID – 800Hz
HIGH MID – 3kHz
TREBLE – 10kHz

7. Compression Amount – This knob controls, as the name says, the amount of compression by providing simultaneous control over compression threshold and make-up gain. The Compression knob, whenever engaged should be used in conjunction with the Gain control. Settings of up to about 12 o’ clock add a subtle compression. This setting will only compress the most aggressive transients in your signal. Setting the knob at around 3 o’ clock yields a heavy compression effect, with more make-up gain. We designed our compressor to be completely transparent and to not color the signal in any way.

8. Compressor LED – When green, this indicates that the compressor is engaged. When orange, it indicates that the signal is getting compressed.

9. Compression ON/OFF – This switch engages/bypasses the compressor circuit.

10. Volume – This knob controls the master volume.

11. Amp Clip LED – This LED indicates that the output from the power amp module is clipping. If the power amp is clipping, turn down the master volume.

12. AUX IN jack – Accepts a standard 3.5mm (1/8” ) audio jack (stereo compatible) for connecting an auxiliary sound source. This can be used for connecting a CD, tape or MP3 player for practicing, rehearsing or for connecting another preamp into the system.

13. HEADPHONES – Accepts a standard 3.5mm (1/8” ) audio jack for connecting headphones.

Rear Panel Features:

1. Mains Power ON/OFF switch – For your safety remember to connect the power cord from the mains outlet to the amplifier BEFORE turning this switch on. Conversely, when disconnecting the amp, turn the switch OFF first, then disconnect cord from the outlet and finally disconnect the power cord from the amp.

2. AC Mains IN – Power socket for connecting the amplifier to the mains power supply.

3. Integrated Fuse compartment – To replace the fuse, first disconnect power cord from the AC Mains IN socket. Use a small screwdriver to remove the fuse compartment. Caution! Replace only with indicated size and type (T5AL 250V). Using a fuse with different rating than specified can cause damage to your amplifier.

4. TUNER OUT – Accepts a standard 6.25mm (1/4”) audio jack for connecting amplifier to a tuner unit. Signal remains active on this output even when the Mute switch is ON, allowing for silent tuning.

5. EFFECT SEND/RETURN – Accepts standard 6.25mm (1/4” ) audio jacks for connecting an effects chain.The FX Loop in the LWA 1000 is of the serial type.

6. LINE OUT – Accepts a standard 6.25mm (1/4”) audio jack. This is an unbalanced line level output for connecting to external devices (auxiliary power amplifier, FOH mixer etc.)

7. DI OUT – Balanced XLR output for connecting the amplifier to a PA or a mixing desk in the studio.

8. PRE/POST – This switch affects the DI OUT signal. In the ”PRE” position the DI OUT is fed the signal before the EQ, Compressor and FX Loop from the preamp. Conversely, in the ”POST” position, the DI OUT is fed the signal after the EQ, Compressor and FX Loop.

9. GROUND LIFT – This switch internally disconnects the chassis ground connection (essentially the Earth terminal of AC Mains) from the ground pin of the DI OUT. Use this functionality when there is excessive hum, possibly caused by a ground loop or bad earthing.

10. SPEAKER OUT – Lockable speaker connector for connecting the amplifier to a speaker cabinet. The minimum load for the amplifier is 4 ohm.

Specifications:

1000 Watt Bass Amplifier Head
Delivers 1000 Watts of power at less than 1% THD
Lightweight and ultra-portable
Noise-free Class A preamp circuitry
Class D power amp section
Two independent channels
Channels can be selected remotely with footswitch
Separate Input Gain control for each channel
Mute function (separate for each channel)
4-Band equalizer (separate for each channel)
Adjustable Compressor with bypass function (separate for each channel)
Compression knob simultaneously controls the compression amount and make-up gain
Including a metal footswitch for switching between channels and TRS foot switch cable
Amp Bag (W A RB 23011) and Rack Ears (W A LWA 1000 RE BLACK, W A LWA 1000 RE SILVER) also available
Stereo auxiliary input jack for connecting MP3 player, CD player, etc.
Headphone out with integrated stereo headphone amplifier
Serial FX Loop
Tuner Output
Line Output
Studio quality balanced DI output with Pre/Post and Ground Lift switches
Dual purpose Neutrik / ¼" jack lockable speaker connector
Internal temperature regulating fan control circuitry
Dimensions (W/H/D): 270mm x 98mm x 146mm / 10.6" x 3.86" x 5.75"
Weight: 2.75 kg / 5.95 lbs.
Available in Aluminium and Black

Product Details
Help
Reviews
Q&A
Related Items

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
Covered destinations : Nationwide
Shipping cost : may vary on destination and purchase amount
Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
Shipment bound for EMS premium regions : The customer may be required to pay additional cost.
*Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

Returns & Exchanges

Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
- Sold out products
- Wrong item delivered
- Defective products

- Shoddy Goods

Ineligible for returns and exchanges:
- Products with customer-induced damages
- Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
- Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects.

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.