Product Details

JBL CONTROL 16CT

6.5-inch Coaxial Ceiling Speaker

*SOLD BY PAIR

Overview

• Two-Way 6.5" Coaxial Ceiling Loudspeaker
• Control 16C/T is a full-range ceiling speaker consisting of a 165 mm (6.5 inch) high tech cone driver and a 19mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blindmount backcan for quick and easy installation.

• Components:
  165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround
  19 mm (0.75 in) soft-dome liquid-cooled tweeter
• Blind-mount backcan for quick and easy install
• Dual conduit/cable clamps
• Combined 70V/100V and low impedance direct operation
  50 Watts at 8Ω nominal setting
   30W multi-tap at 70V/100V
• 62 Hz – 20 kHz bandwidth with wide 110° coverage
• High 91 dB sensitivity for high maximum SPL
• White or black (-BK)

• Frequency Range (-10 dB) -------------------------- 62 Hz – 20 kHz
• Power Capacity (at low-Z)-------------------------- 100 Watts Continuous Program Power 50 Watts Continuous Pink Noise
• Transformer Taps--------------------------30 W, 15 W, 7.5 W @ 70V or 100V (plus 3.8 W @ 70V only)
• Frequency Response (±3 dB)-------------------------- 96 Hz – 15 kHz
• Nominal Sensitivity-------------------------- 91 dB
• Nominal Coverage Angle-------------------------- 110° conical coverage
• Directivity Factor (Q)-------------------------- 7.8
• Directivity Index (DI)-------------------------- 8.2 dB
• Rated Maximum SPL-------------------------- 108 dB @ 1 m (3.3 ft) average, 116 dB peak
• Nominal Impedance-------------------------- 8 ohms (in direct/bypass 8Ω setting)
• Crossover Network--------------------------  12 dB/oct (2nd order) low-pass to LF driver,12 dB/oct (2nd order) high-pass to HF driver
• LF Driver -------------------------- 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil
• HF Driver-------------------------- 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
• Input Connector Removable locking 4-pin connector with screw-down terminals.
• Max wire size-------------------------- 12 AWG (2.5 mm2)
• Connector Wiring-------------------------- Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru Strain Reliefs  Strain relief for two cables or two flex conduits via coupled clamping mechanism
• Materials -------------------------- ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated steel backcan
• Safety Agency -------------------------- UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker;
   Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems
• Dimensions-------------------------- 253 mm diameter x 225 mm depth from back of baffle (10.0 in diameter x 8.8 in depth)
• Ceiling Cutout Size-------------------------- Circular cutout with 223 mm (8.8 in) diameter (cardboard cutout template included)
• Ceiling Thickness Range--------------------------Up to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 60 mm (2.4 in) ceiling thicknesses Safety Seismic Attachment        One point, top surface
• Net Weight -------------------------- 3.4 kg (7.4 lbs, one speaker)
• Shipping Weight--------------------------11.2 kg (24.7 lbs, pair in master carton)
  Optional Accessories  
•  MTC-26NC new construction bracket
• MTC-26MR mud-ring construction bracket
• MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in, ordering one set = 24 dog-ears for 6 speakers)
• MTC-48TR tile rail for 1200 mm (4 ft) tile spans

What’s in the Box?

• Control 16C/T 2-Way 6.5" Coaxial Ceiling Loudspeakers (Pair, White)
• 2 x C-Ring Support Backing Plate
• 4 x Tile support Rail for 2' or 600mm Tile Spans
• 2 x Cardboard Cutout Template
• 2 x Paint Shield
• 2 x Removable Locking Multi-Pin Connector
• 2 x Grille

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry