Product Details

Allen & Heath ME-1
Personal Mixing System

Overview

The cornerstone of the ME System is the ME-1 personal mixer, which is ready to use with our own iLive and GLD series digital mixers. ME-1 is complemented by the ME-U hub, which opens up the benefits of ME to users of other professional digital mixers via DanteTM, EtherSound or MADI. ME-1 also has an Aviom® compatibility mode for use with Aviom use with ® Pro16® systems.

16 ASSIGNABLE USER KEYS

• Backlit rubber keys make ME-1 controls perfectly visible in the dark. The 16 user keys can be assigned to a single source (mono or stereo) or to a Group, with all the convenience of pressing a single button no matter what you want to control – the vocalist mic, a stereo pair or the whole drumkit. Preset store/recall can be enabled or disabled per key to present only the control that is needed.

16 USER PRESETS

• Levels, pan, mutes and key assignments can all be stored and recalled at the touch of a button.
• Presets for different bands and application scenarios can be conveniently copied to USB key or the whole configuration saved. Ideal for archiving or quick transferring to other units.

GROUPS

• Groups make it possible to mix up to 40 sources with only 16 keys. They also save a lot of buses at the main console: whereas other personal monitor systems rely on subgroups and pre-mixes sent from the console, ME-1 has the sophistication to  do it all on-board whilst remaining easy to use

OLED SCREEN

• Provides a clear display of level and pan for the selected source, system setup and information menus, and a highly responsive stereo signal meter. Can be dimmed for low-light operation.

CUSTOM NAMING

• It helps to know which source you are tweaking! ME-1 can display custom names for all channels and groups. When coupled with an Allen & Heath GLD or iLive system using dSNAKE, the ME-1 does the work for you by picking up source names automatically from the stream.

ONE KNOB CONTROLS EVERYTHING

• A single, large rotary control beneath the display is used to access and navigate all of ME-1’s most commonly used functions and menus, including:
•  Input control of level & pan
• Group control of master level
• Level/pan for each member of the group
• Control of master EQ and limiter
•  Global Trim (simultaneously adjusts all channel levels to prevent running the mix too hot)

MASTER LEVEL AND KEY

• Dedicated control and key to access the Master 3-band EQ and limiter settings.

BUILT-IN AMBIENT MIC

• With ME-1, musicians are not isolated from the rest of the stage. The ambient mic keeps them in touch with the stage sound and lets them hear the audience and communicate with each other without the need to pull out their ear pieces. The local mic level is independent of the master level control

SOLO AND MUTE KEYS

• Individual sources, groups or masters can be muted. Use the Solo key to meter and listen to just their contribution to the mix.

SHIFTED FUNCTIONS

• System setup, standby mode and preset store are protected from accidental operation by holding Shift while pressing other keys. All input levels can be simultaneously trimmed by holding Shift while turning the rotary.

HEADPHONES

• Minijack and 1/4” headphone outputs with powerful, discrete amplifier design.

MONO OUT

• 1/4” TRS balanced line out (mix only, no ambient mic).

AUX INPUT

• Stereo input for local sources such as MP3 players or click tracks. Sensitivity is well matched to portable consumer devices.

LINK IN / OUT

• Secure and reliable EtherCon connectors for daisy chaining or star topology using ME-U or off-the-shelf Ethernet switches for any number of ME-1 mixers.

 

DC IN

• ME-1 can be powered via Cat5 using a PoE switch or the ME-U hub, or mains powered using the included power supply.

USB PORT

• For firmware updates and archiving / transferring individual presets or the full configuration.

FREE STANDING OR SURFACE MOUNTED

• Mount on top of a mic stand with the built-in 3/8” insert, or mount on the side of the stand with the supplied bracket.

Features

• Inputs  ---------------------- 40 Inputs (CAT5), Stereo Aux, ambient mic
• Outputs ----------------------2 x stereo (Line or Headphones), mono line out
• Control Input: ----------------------Level, Mute, Pan, Solo, Trim All
• Master Control: ----------------------Level, Mute, 3-band EQ, Limiter
• Group Control: ---------------------- Level, Mute, Level/Pan for sources within a Group
• Groups  ---------------------- 16; up to 40 sources assignable
• Presets ----------------------16; Store input levels, Mutes, Pans, Key assign, Names, Group sources
• Configuration ---------------------- Stores setup and all presets
• Names  ---------------------- Channels, Keys, Unit, Presets, Configuration
• USB Data Port  ----------------------Individual presets or config transfer, firmware update
• CAT5 ---------------------- Audio and PoE: Link In and Link Out, locking etherCON connectors
• Stereo Output  ----------------------Stereo 1/4" and 3.5 mm jacks Headphones: 300 mW + 300 mW into 100 Ω load < Maximum +21 dBu
• Mono Output ----------------------Balanced TRS jack Nominal 0 dBu, maximum +18 dBu
• AUX Input  ----------------------Stereo 3.5 mm jack Nominal -8 dBu, Maximum +10 dBu Input Impedance >10 kΩ
• AD/DA Conversion ----------------------  24-bit Delta/Sigma, 48 kHz
• Residual Output Noise ----------------------48 kHz -95 dBu (Level down, 20 to 20 kHz)
• Frequency Response  ----------------------+0/-1 dB, 10 Hz to 20 kHz
• Power  Mains: ----------------------100 to 240 VAC, 50 / 60 Hz In, 12 VDC 1.25 A Out
• Power over  CAT5 Cable (PoE):  ----------------------10 W (Requires 13 W from PoE hub)
• Dimensions  ---------------------- (W x D x H)  8.9 x 5.9 x 2.2" (225 x 150 x 55 mm)
• Weight  ---------------------- 2.0 lb (900 g) including phones hook

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry