Product Details

LD SYSTEMS VIBZ 24DC


24-CHANNEL MIXING CONSOLE  WITH DFX AND COMPRESSOR


Overview

The flagship of the VIBZ Series of mixing desks, the VIBZ 24 DC is designed for superb audio in home studio and live applications. It sports 16 mono channels with 3-band EQ and semi-parametric midrange, 4 stereo channels with 4-band EQ, 4 subgroups, 24-bit digital effects with 100 presets and smooth 65 mm audio taper faders.

All channels feature high-quality preamps with gain control, 4 aux sends, mute, PFL and routing switches plus signal and clip LEDs. Two sends are switchable pre or post fader to enable monitoring or effects use. The mono channels' XLR mic and TRS line inputs are electronically balanced with channels 1 – 8 providing convenient one-knob control of the built-in compressor and individual insert points for outboard processing.

The master section offers balanced and unbalanced main mix and individual group outputs with precision metering, control room and headphone outputs with level controls and a global 7-band graphic EQ. The VIBZ 24 DC integrates a multi-voltage power supply for 100 – 240 V AC operation.

 Features:

    Balanced microphone and line inputs

    Tri-band EQ with semi-parametric mid

    4 aux send before switching two faders, or after

    Mono channel 8 and an insert compressor

    Channel routing, mute and PFL switch

    48 V

    Four independent sub group outputs

    Balanced and unbalanced main outputs

    Control Room and Headphone outputs

    10 Hz to 45 kHz frequency response

Sample Set-up:

1. Make sure that the mixer and all devices to be connected to the mixer are turned off.

2. Connect the devices to the mixer using appropriate cables.

3. Adjust the input gain of all the channels and all volume controllers for channels 1 to 23/24 and MAIN MIX to minimum. Place all equalizer controllers

in the central position (stop). Adjust the volume controller on the active loudspeaker to minimum. Turn on the +48 V phantom power on the

mixer only if you are using a condenser microphone.

4. Turn on the devices in the following order: microphone and keyboard (or other source devices), then the mixer and lastly the active speakers.

5. Always adjust the gain control of the channels so that the Clip LED of the corresponding channel only lights up briefly when signal peaks occur.

Avoid the permanent lighting of the Clip LED by reducing the input gain (Gain).

6. Press the L-R switch of the channels used to the down position and leave the MUTE switch in the up position, as well as the MUTE switch on the

MAIN MIX sum channel.

7. Bring the volume controllers (Fader) of the channels in use and of the sum channel MAIN MIX approximately to the 0 dB mark.

8. Now increase the volume of the active speakers for the incoming signal (e.g.speaking, singing, keyboard) to the desired level.

9. Fine-tuning can now be achieved by adjusting the volume ratios of the channels and by using the equalizer, compressors and effects device as

desired.

Specifications:

Mid Freq, EQ Low, EQ on/off, DFX, AUX Send 1-2 pre (AUX2 pre/post switchable), AUX

Send 3-4 post, Channel Mute, Fader Routing switch (Group 1/2, Group 3/4, Main L+R),

Pan/Bal, Channel-Fader, PFL switch.

Control Elements Channels 17/18 + 23/24

Gain, LINE/USB -switch (channels 21 - 22), EQ Hi, EQ Mid, EQ Mid Freq, EQ Low, EQ

on/off, DFX, AUX Send 1-2 pre (AUX2 pre/post switchable), AUX Send 3-4 post, Channel

Mute, Fader Routing switch (Group 1/2, Group 3/4, Main L+R), Bal, Channel-Fader,

PFL switch.

Controls Master Section:

7-band graphic EQ, EQ On/Off, DFX Presets, DFX Mute, AUX/DFX Send 1 - 4, DFX to

Main, DFX to Aux, Phones, CTRL, GROUP to Main -switch, Phantom Power +48V, Main

Mix Fader, Group Fader, Power, CTRL Room Source MAIN/GR, GR1/2 - GR3/4, Group

Mute, Main Mute.

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry