Product Details

 CBT 1000E

Purpose-Designed Extension Loudspeaker for CBT 1000 Line Array Column Speaker 

 Colors : Black (RAL9004) or White (-WH) (RAL9016)

Overview

The CBT 1000E Extension Loudspeaker from JBL features six 6.5" low-frequency drivers and a purpose-designed crossover network for use in the CBT 1000 + 1000E system. The drivers feature neodymium magnet motors with 2" diameter voice coils providing maximum flux in a compact package. The magnetic structure is magnetically shielded and the copper pole tips reduce flux modulation and minimize distortion. The 0.62" long coil provides linear drive and high power handling of 1500W in a compact driver. Each driver features damped blended surrounds and coated sealed paper cones. They are coated with diaphragm materials to provide moisture, UV, and salt resistance for outdoor capability. This extension speaker comes in a tough fiberglass reinforced ABS cabinet. Its thick heavy-duty aluminum grille allows for rust-free installation outdoors. A coupler plate is included for combining this extension speaker with the CBT 1000 array speaker (not included).

Features

• Six 6.5" high-excursion LF drivers

• 1500W RMS power handling

• Built-in purpose-designed crossover network for combining with CBT 1000 array speaker

• Coupler plate is included for joining this speaker unit with the array speaker

• Doubles power handling of the array speaker and extends pattern control

Specifications

 Active or PassivePassive

Frequency Response38 Hz to 650 kHz at -10 dB

Power Capacity1500 W (6000 W peak), 2 hours

1000 W (4000 W peak), 100 hours

 These values conform to IEC standard,

full bandwidth pink noise with 6 dB crest factor

Maximum Sound Pressure Level (SPL)124dB full space, 130 dB half-space (65 to 300 Hz)

 2 to 6 kHz, calculated based on power rating

and measured sensitivity, exclusive of power compression

Nominal Sensitivity2.83 V at 3.3' (1 m), average 2 to 6 kHz:

92 dB full space

98 dB half-space (65 to 300 Hz)

ImpedanceNominal: 8 Ohms

CrossoverNot Specified by the Manufacturer

Low Frequency Driver6 x 6.5" (165 mm) driver

Maximum Input Voltage100 V RMS (2 hours)

200 V Peak (when powered separately,

not in parallel with CBT 1000)

Enclosure MaterialFiberglass reinforced ABS cabinet,

powder-coated 1050 aluminum grille

InsertsMounting Holes:

14 x M8 insert on back panel (20mm deep)

for use with swivel pan/tilt bracket(s) (not included)

Conform to the industry standard rectangular

5 x 2.75" (127 x 70 mm) pattern for Omni Mount and

other compatible third-party brackets (not included)

 4 x M8 insert on top

4 x M8 insert on bottom of cabinet end-caps

Input ConnectionsNot Specified by the Manufacturer

Outdoor UseIP-55 rated, per IEC529, when installed with optional

MTC-PC2 panel cover. Exceeds Mil Spec 810 for humidity,

temperature and UV, ASTM G85 for acid-air/salt-spray (200 hours)

Packaging Info 

Dimensions9.9 x 40.2 x 11.6" (25 x 102 x 29 cm)

Weight44 lb (20 kg)

What’s in the Box

- CBT 1000E

- Coupler Plate

- Mounting Hardware 

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry