Product Details

U 67 SET

Large-Diaphragm Tube Condenser Microphone

Overview
The nickel Neumann U 67 Set is a large-diaphragm tube condenser microphone designed as a faithful reissue of the legendary vintage U 67 for vocalists, musicians, and recording engineers in home, project, and commercial studios. It features the venerable K 67 capsule, a BV 12 output transformer, and EF86 tubes that are prudently chosen for ideal sonic characteristics.Its three selectable polar patters, omnidirectional, cardioid, and figure-8, provide versatility for both close and distant miking configurations. A -10 dB pad raises the maximum SPL from 114 dB to 124 dB, allowing you to record loud sound sources without distortion. The 20 Hz to 20 kHz frequency response can be tailored to counteract proximity effect via the switchable low-cut filter.The U67 Set ships with a matching shockmount, proprietary XLR 7-pin cable, and redesigned power supply in a sturdy aluminum case.

Features

True to the Original

Sonically, this reissue is identical to the U 67 made from 1960 to 1971; It uses the same capsule and electronic design. Key parts, such as the BV 12 output transformer, are meticulously reproduced according to original documentation. EF86 tubes are carefully selected for optimal characteristics and lowest noise in a dedicated measurement facility. The power supply was redesigned to meet today's strict safety requirements and to accommodate the slightly higher filament current of newer premium grade tubes. The new power supply NU 67 V is fully compatible with older U 67 microphones.

Quality Engineering

The U 67 was the first microphone equipped with the famous K 67 capsule, which has since become associated with the Neumann sound, and continues to be used in its successor, the U 87 A. No less important is the U 67's masterful tube circuit featuring a clever pre-emphasis/de-emphasis scheme to minimize tube hiss. The U 67 was also the first microphone to address modern recording techniques such as close miking. Its switchable low-cut filter compensates for the proximity effect occurring at short recording distances. Using its -10 dB pad, the U 67 can handle high sound pressure levels of up to 124 dB without distortion (and much more if you don't mind a bit of "tube grit").

Ready for the Studio

The U67 Set includes a matching shockmount, power supply, and proprietary 7-pin XLR cable. The mic and its accessories fit snugly in the supplied aluminum carry case.

Specifications          

Analog Performance

Sound Field      Mono

Operating Principle        Pressure Gradient

Transducer        Condenser

Tube     Yes

Polar Pattern     Cardioid, Figure-8, Omnidirectional

Pattern Selection           Switched

Frequency Range          20 Hz to 20 kHz

Signal to Noise Ratio     Omnidirectional: 62 dB CCIR

Omnidirectional: 73 dB A-Weighted

Cardioid: 66 dB CCIR

Cardioid: 77 dB A-Weighted

Figure 8: 63 dB CCIR

Figure 8: 74 dB A-Weighted

Equivalent Noise Level  Omnidirectional: 32 dB CCIR

Omnidirectional: 21 dB A-Weighted

Cardioid: 28 dB CCIR

Cardioid: 17 dB A-Weighted

Figure 8: 31 dB CCIR

Figure 8: 20 dB A-Weighted

Maximum SPL   114 dB SPL

Pad      -10 dB

Impedance        200 Ohms

Load Impedance           1 kOhms

Sensitivity Omnidirectional: 15 mV/Pa at 1 kHz into 1 kOhms

Cardioid: 24 mV/Pa at 1 kHz into 1 kOhms

Figure 8: 16 mV/Pa at 1 kHz into 1 kOhms

General

Output Connectors        1 x 7-Pin XLR

1 x 3-Pin XLR

Length  7.87" / 200 mm

Diameter           2.20" / 56 mm

Weight  1.23 lb / 560 g

Packaging Info

Package Weight                                                16.8 lb

Box Dimensions (LxWxH)                                  21.8 x 14.8 x 7.6"

What’s In The Box

- Neumann U 67 Set Large-Diaphragm Tube Condenser Microphone

- Neumann Z48 - Older Style Microphone Clamp for U67, U87 and U87AI

- Neumann NU 67 V Power Supply for U67 Microphone

- Neumann UC 5 Microphone Connection Cable for U 67 Microphone (Black, 32.8')

- Aluminum Case

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry