Product Details

KH 80 DSP A G EU

2Way Active Studio Monitor 

Overview

The gray Neumann KH 80 DSP is a 2-way active studio monitor well suited for near-field monitoring and multichannel setups in music studios, broadcast centers and vans, as well as home studios and desktop audio applications. The KH 80 utilizes two amplifiers (120W and 70W) to power the 4" woofer and 1" tweeter respectively, an onboard DSP engine, a Mathematically Modeled Dispersion waveguide (MMD), an analog input, and an extensive range of optional mounting hardware. The DSP function is accessed via a standard IP network connection that allows the monitoring system to be controlled using the Neumann.Control app, which runs on a Windows/Mac computer or iOS/Android tablet. With the use of the latest acoustic and electronic simulation and measurement technologies, the KH 80 can be used in diverse acoustical conditions with any source equipment and in a wide variety of physical locations, ensuring accurate sound reproduction.

Features

• Setup:

• 1, 2, 4, 5, 7, and 9 loudspeakers

• Identify loudspeakers on the network that are in the room

• Assign the identified loudspeakers to positions in the room

• Align:

• Guided Alignment: A process where you are asked very simple questions about the room and the loudspeaker position, and then the app adjusts the response of each loudspeaker accordingly

• Manual Alignment: 8-band fully parametric equalizer for expert users. Expert users have complete freedom to adjust an 8-band parametric equalizer, levels and delays in each loudspeaker as they wish. Manual Alignment can also be used to edit Guided Alignments in a more detailed way

• Operate:

• System and alignment selection

• Volume control, preset levels, dim, mute all

• Groups, solos, mutes

• Other system settings such as delay, standby level, and logo brightness

• In-house simulated 1" tweeter with alloy fabric dome

• Latest modeling techniques used to minimize non-linear (harmonic and intermodulation) distortion

• Low-distortion high frequency reproduction

• Powered by highly efficient 70W amplifier

• Elliptical Mathematically Modeled Dispersion (MMD) waveguide

• Smoother off-axis response

• More forgiving of diverse acoustical environments

• Wide horizontal dispersion

• Freedom of movement across the mixing console

• Narrow vertical dispersion

• Reduces reflections off the mixing console

• Two-color + dimmable Neumann logo

• Displays operation status and activation of the extensive protection system

• Dimmable for low-lighting conditions or behind the screen applications

• In-house modeled long-throw composite sandwich 4" cone bass driver with Extremely Linear Force Factor (ELFF), magnetic shielding and flow optimized die cast basket

• Damping of break up modes brings low distortion at high sound levels

• Linear pistonic motor gives a very low harmonic distortion even at high excursions

• Reduced air noise and improved rocking modes

• Powered by highly efficient 120W amplifier

• Robust metal grilles

• Protects against mechanical damage

• Large high-capacity flow-optimized bass reflex ports with pipe resonance damping

• Fast bass transient response

• Reduced bass compression at high output levels

• No coloration from organ pipe resonance

• Easier to mount in tight spaces

• Compact polycarbonate composite cabinet

• Robust package for a long life

• No standing wave resonances

• One-piece front panel with no discontinuities

• Reduced diffraction and smoother frequency response

• Standby function

• Reduces power consumption when product is not in use

• Control function

• Use the back panel controls or the control set defined by the Neumann.Control software

• 4-position low-mid acoustical control

• Compensates for nearby desktops

• Fast acoustical set up in mobile applications

• Repeatable acoustical settings after moving loudspeakers

• Wide range input gain and output level controls

• Easier interfacing with signal sources

• Fully documented extensive mounting hardware range

• More flexibility in mounting cabinets in more diverse locations and backwards compatible to previous products

• Easy advanced planning for installations

• Universal double-insulated switched-mode power supply (100 to 240V)

• One version works in any country and robust to poor quality mains supply

• Ground loops are impossible

• Network connector using standard IP protocol and your existing network infrastructure

• No additional special equipment needed

• Loudspeaker system can be controlled via the Neumann.Control software

• Analog input socket can accept XLR or 6.3 mm (1/4”) jack plugs, electronically balanced with completely symmetrical internal signal chain

• Completely symmetrical internal signal routing minimizes noises caused by external electromagnetic interference

• Production consistency due to automated computer optimized alignment in final testing

• Any KH 80 DSP is pair matched to any other KH 80 DSP

• Separate fast acting thermo limiters for woofer and tweeter to protect the voice coils and power amplifiers

• Woofer soft clip and excursion limiters

• Fast acting and highly reliable

• Allows extraction of the maximum performance

• Low heat dissipation amplifiers with large headroom and overheat limiting

• Improved transient response

• Assured reliability and safety

• 8 Precision Alignment acoustical controls accessible via control network

• Accurate and flexible alignment of the loudspeaker in the room and within systems

• Delay (0 to 70 ms)

• Lip-sync: To align audio and video signals up to 1.75 frames at 50 Hz or 2.1 frames at 60 Hz

• Time-of-flight: To compensate for listening distance differences up to 24 m (79 ft.)

• Linear phase crossover

• Flat phase response for timing transparency

Specifications

Studio Monitor

Monitor TypeActive 2-Way

EnclosureBass-Reflex, Shielded

DriversLF Driver: 1 x 4" / 101.6 mm Composite Cone

HF Driver: 1 x 1" / 25.4 mm Tweeter

AmplificationLF Amplifier: Rated at 90 W / 120 W Peak

HF Amplifier: Rated at 50 W / 70 W Peak

Performance

Frequency Range53 Hz to 21 kHz  ± 6 dB

57 Hz to 21 kHz  ± 3 dB

Maximum Sound Pressure Level (SPL)108.8 dB

Dynamic Range114 dBA

Maximum Input Level+24 dBu (Balanced)

Analog Input Sensitivity/Gain0 dB to -15 dB (Incrementally Variable)

Protections and LimitingExcursion Limiter, Peak Limiter, Soft Limiter, Thermal Limiting

Signal Processing

EQ1 x Low-Mid Shelf  dB

Crossover

Crossover FrequencyLow-Pass Frequency: 1.8 kHz, 48 dB/Octave Slope

Connectivity

I/O1 x Combo XLR / 1/4" Balanced Female Analog Input

Computer Interface1 x RJ45 (Network)

Power

AC Input Power100 to 240 VAC at 50/60 Hz

Power Consumption180 W (Maximum)

Environmental

Operating Temperature50 to 104°F / 10 to 40°C

Storage Temperature-13 to 158°F / -25 to 70°C

General

Mounting Points2 x M6 (Rear Panel)

Dimensions (W x H x D)6.1 x 9.2 x 7.6" / 154.0 x 233.0 x 194.0 mm

Weight9.0 lb / 4.1 kg

Packaging Info

Package Weight9.6 lb

Box Dimensions (LxWxH)14 x 11 x 9.7"

What’s In The Box

- Neumann KH 80 DSP A G EU Active 2-Way Studio Monitor (Gray, Single)

- Power Cord

- 4 x Self-Adhesive Feet

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry