Product Details

Overview:

The very compact size, no compromise transducers and a unique composite cabinet design make the HDL 10-A the perfect tool in many situations.

Ideal in live sound reinforcement and reliable installed situations. The HDL 10-A is the ideal choice when line array performance is needed and a fast and easy set up is a must. The system is powered from a 1400 Watt Peak Power 2 way digital amplifier, sound is processed from a powerful DSP.

TOUR SOUND IN A COMPACT SIZE

• The HDL 10-A is a two way active line array module designed for live sound reinforcement and installed sound applications. It features: 2 x 8-inch woofers, 1 x 2.5-inch titanium compression driver, digital amplifier with switch mode power supply and DSP controlled Input section with selectable presets. The HDL 10-A delivers: 133dB max SPL; 1400 Watt peak power (700 Watts RMS); 65Hz – 20kHz frequency response.

MAXIMUM EFFICIENCY

• The HDL 10-A is a true active and high power ready to use touring system equipped with a high efficiency digital amplifier that delivers superior SPL reducing energy requirement. The integrated processing and the cabling reduction will make the set-up faster and easier and, thanks to its compact size, the truck space requirement is reduced to the minimum.

FULLY INTEGRATED SYSTEM

• The integrated processing and the cabling reduction will make the set-up faster and easier.
• The compactness and lightweight of the system combined with top of class steel on board mechanics helps during rigging operations as well as during transportation.

The HDL 10-A is powered by a 1400W peak power digital amplifier, split 200W for the HF and 500W for the LF. A new generation DSP handles all the processing within the cabinet and allows adjustment of Cluster size and HF projection. The DSP also includes presets for indoor/outdoor usage and highly curved arrays. All these settings are accessed by the buttons on the rear of the cabinets.

The easy to access controls on the back of the speaker allow a number of simple optimisations to be carried out at the flick of a switch: two possible HF settings, four possible cluster configurations; a special EQ setting for high curved configurations and an Indoor Correction EQ.

INPUT / LINK

• MAIN XLR INPUT (BAL/UNBAL). The system accept female XLR input connectors and line level signals from a mixing console or other signal source.
• LINK XLR OUTPUT. The output XLR male connector provides a loop trough for speakers daisy chaining.

VOLUME KNOB

• Controls the volume of the power amplifier. The control ranges from - (maximum attenuation) to the MAX level (maximum output).

STATUS INDICATORS

• POWER INDICATOR. Power on indicator. When the power cord is connected and the power switch is turned on this indicator lights green.
• SIGNAL INDICATOR. The signal indicator lights green if there is signal present on the main XLR input.
• LIMITER INDICATOR. The amplifier has a built in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers. When the peak clipping circuit is active the LED blinks orange. It is okay if the limit LED blinks occasionally. If the LED blinks frequently or lights continuously, turn down the signal level. The amplifier has a built in RMS limiter. If the RMS limiter is active the LED lights red. The RMS limiter has the purpose to prevent damages the transducers. The speaker shall never be used with the limit indicator red, continuous operation with the RMS protection active can cause damages to the speaker.

HF SWITCH

• HF. The switch gives the possibility to set high frequencies correction depending on target distance (air absorption correction):

- NEAR (used for pole mount applications or near field)

- FAR (for farthest field).

CLUSTER SWITCH

• The combination of the 2 switches gives 4 possibilities of mid low frequencies correction depending on cluster size.

- 2-3 modules (used for pole mount applications ground stacking)

- 4-6 modules (small flown systems)

- 7-9 modules (medium flown systems)

- 10-16 modules (maximum flown configuration).

HIGH CURVING SWITCH

• The switch gives the extra possibility to boost mid frequencies depending on a high curving cluster configuration of few pieces.

- OFF (not active correction)

- ON (for high curving arrays of few pieces HDL10A).

INDOOR SWITCH

• The switch gives the extra possibility to set low frequencies correction depending on a indoor/outdoor use, in order to compensate room reverberation on lows.

- OFF (not active correction)

- ON (correction for reverberant indoor rooms).

AC PANEL

• AC POWERCON RECEPTACLE.
• RCF D LINE uses a POWERCON locking 3-pole AC mains. Always use the specific power cord provided in the package.
• AC POWERCON LINK RECEPTACLE. Use this receptacle to link one or more units. Always make sure that the maximum current requirement does not exceed the maximum admitted POWERCON current. In case of doubt call the closest RCF SERVICE CENTRE.
• POWER MAIN SWITCH.
• The power switch turns the AC power ON and OFF. Make sure that the VOLUME is set to - when you turn on the speaker.

RCF SHAPE DESIGNER SOFTWARE

• In order to assist with the set up procedures for the HDL 10-A line array system, RCF has developed a complete prediction software package.
• The software enables a complete two dimensional simulation of the behaviour of the HDL 10-A modules and also suggest the correct subwoofer combination.
• The system curvature angles and the sound projection data are computed with maximum sound pressure levels for the given design.
• The software will allow simulations up to a maximum of sixteen HDL 10-A systems.
• The rigging menu provides data for weight, centre of gravity and length of the array configuration. Rigging points and rigging hardware configurations are also computed.

LOW FREQUENCIES

• 2.0" Inside-Outside voice coil
• Water resistant fibre doped cone
• Polycotton M-roll surround
• High power magnetic structure

EDGE WOUND VOICE COILS

• Edge wound voice coils – ensuring the best linear frequency response and maximum SPL output

HIGH FREQUENCIES

• The ND640 large format compression driver delivers one of the key advantages of the HDL 10-A, the 2.5” voice coil allows a crossover point of 800Hz and therefore almost all of the vocal range can be produced by this driver.
• This allows better coverage and dispersion control, and superior efficiency.

PURE TITANIUM DIAPHRAGM

• RCF has developed an oxygen free process of moulding pure titanium ultra thin films in high quality, finely controlled shaped diaphragms. Our process offers superior sonic quality, extended to the highest audible frequencies which guarantee consistent power handling and reliability

INSIDE/OUTSIDE VOICE COILS

• RCF has developed a unique voice coil, combining the advantages of inside/outside technology to the superior quality of polyimide-imide materials (wire resins and former resins). The inside/outside coil offers many advantages: - the dissipation surface is doubled - the adhesion area to the former is doubled - during thermal expansion the former is squeezed between inside and outside layers offering the best mechanical resistance.

SPECIFIC DESIGNED WAVEGUIDE

• The custom designed waveguide allows a precise coverage of 100 x 15 degrees, whilst also delivering a superb,linear high frequency response.

SUPERIOR INTELLIGIBILITY

• Thanks to the large format compression driver on a wave-guide, the HDL 10-A offers superior intelligibility over distance

COMPETITORS ARRAY

• The RCF HDL will maintain its intelligibility, definition and signal strength while competitive models will attenuate and break up before the sound reaches its throw distance.

CABINET

• The HDL 10-A tour grade system comes in a structurally wooden reinforced composite polypropylene enclosure, and is equipped with two aluminium side handles with rubber handgrips and two rear pocket handles for portability

CONFIGURABLE MECHANICS

• The integrated mechanics are both fast and reconfigurable, allowing the system engineer to create genuine J-shaped or spiral arrays

TYPICAL HDL 10-A ARRAY

• The top model shows a typical RCF line array hang with the angles set and splayed in 2-degree resolution. However, competitive models are already pre-configured with constant curvature fixed angles, with no opportunity to optimise the system to the venue’s characteristics.  

COMPETITORS ARRAY

• In this class, the competitive pre-configured line arrays referred to will typically be restricted to four or five elements, whereas the RCF solution can handle up to 16 modules, variably configurable, to produce a genuine J-shaped array.

SUPERIOR INTELLIGIBILITY OVER DISTANCE

• Thanks to its large format compression driver on a waveguide, the HDL 10-A offers superior intelligibility over distance.

CUSTOM DESIGNED WAVEGUIDE

• The custom designed waveguide allows a precise coverage of 100 x 15 degrees, whilst also delivering a superb, linear high frequency response.

SIDE HANDLES

• The HDL 10-A cabinet features two newly designed die-cast aluminium side handles powder coated and with rubber hand-grip.

FRONT GRILLE

• The heavy duty front grille is power coated. A special transparent-to-sound foam backing on the inside of the grille helps to further protect the transducers from dust.

Features:

• 1400 Watt Peak power - 700 Watt RMS
• 133 dB max SPL
• 65 Hz 20 kHz frequency response
• 2 x 8" Woofers
• 1 x 2" Compression Driver
• DSP controlled Input section with selectable presets
• Tour grade safe and solid variable mechanics
• Composite PP enclosure structurally wooden reinforced

Applications:

• Live sound
• Rental
• Portable PA, clubs, ballrooms, live theatre
• House of worship
• Theme parks
• Music playback and sound reinforcement in small and mid-size venues
• Corporate A/V professionals and sound system hire companies

Technical Specifications:

ACOUSTICAL SPECIFICATIONS

• Frequency Response -3 dB:................65 Hz ÷ 20000 Hz
• Max SPL:.............................................133 dB
• Horizontal coverage angle:.............100°
• Vertical coverage angle:....................15°
• Compression Driver:.........................2", 2.5" v.c.
• Woofer:............................................2 x 8", 2.0" v.c.

INPUT/OUTPUT SECTION

• Input signal:.....................bal/unbal
• Input connectors:.................XLR
• Output connectors:...............XLR
• Input sensitivity:...................-2 dBu / +4 dBu

PROCESSOR SECTION

• Crossover frequencies.................:800 Hz
• Protections:..................................Thermal, RMS
• Limiter:..................................Soft limiter
• Controls:.................................Cluster, HF, High curving, Indoor

AMPLIFIER SPECIFICATIONS

• Total power:............................1400 W PEAK
• High frequencies:....................400 W PEAK
• Low frequencies:.....................1000 W PEAK
• Total power:...........................700 W RMS
• High frequencies:...................200 W RMS
• Low frequencies:...................500 W RMS
• Cooling:...............................Convection
• Connections:....................Powercon in/out

CABINET

• Cabinet Material:..........Composite PP, wooden reinforced
• Hardware:.......................Rigging flyware
• Handles:.........................2 side
• Colour:..............................Black

PHYSICAL SPECIFICATIONS

• Height:...................294 / 11.5 mm/inch
• Width:.....................569 / 22.40 mm/inch
• Depth:.....................434 / 17.09 mm/inch
• Net Weight:.................25.4 / 55.99 kg/lbs

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry