Product Details

TLM 107

Multi-Pattern Large Diaphragm

 Condenser Microphone (Studio Set, Nickel)

Overview
Styled in nickel, The Neumann TLM 107 Studio Set provides you with a Neumann TLM 107 microphone, a stand mount, a wooden box, and an EA 4 Elastic Suspension Shockmount to isolate the mic from stand-associated rumble. The microphone provides five polar patterns, transformerless circuitry, two selectable high-pass filters, two selectable pads, and more. The Elastic Suspension Shockmount provides a 5-8"-27 female thread and a thread adapter for 1/2"-3/8" stands. The nickel Neumann TLM 107 is a high-quality, flexible large diaphragm condenser microphone with five selectable polar patterns that is designed to accommodate a wide variety of professional studio, broadcast and demanding home recording applications. The TLM 107 is engineered with a transformerless design that permits a high degree of linearity and a large dynamic range. Featuring selectable omnidirectional, wide angle cardioid, cardioid, hypercardioid and figure-8 polar patterns, this microphone is suitable for a wide range of miking techniques and configurations.

Features

The mic also features -6dB and -12dB pads that can be engaged for recording louder sound sources such as brass or guitar amplifiers. Additionally, it has selectable high-pass filters at both 40 Hz and 100 Hz for filtering out unwanted low frequencies to save you time when mixing.

- Low self-noise of 10 dB-A

- Maximum sound pressure level of 141 dB SPL, can be increased to 153 dB SPL with pad

- Low cut and pad are controlled via navigation

- Pad and low cut status displayed by LED

- Illuminated polar pattern display

- Indicator light displays are turned off automatically after 15 seconds

Specifications

Analog Performance

Operating Principle        Pressure Gradient

Transducer        Condenser

Polar Pattern     Cardioid, Figure-8, Hypercardioid, 

Omnidirectional, Wide-Angle Cardioid

Pattern Selection           Switched

Frequency Range          20 Hz to 20 kHz

Signal to Noise Ratio     72 dB CCIR

84 dB A-Weighted

Equivalent Noise Level  22 dB CCIR

10 dB A-Weighted

Maximum SPL   141 dB SPL

Pad      -6 dB

-12 dB

THD      < 0.5%

Impedance        50 Ohms

Load Impedance           1000 Ohms

Sensitivity         11 mV/Pa at 1 kHz into 1 kOhms

General

Output Connectors        1 x 3-Pin XLR

Operating Current Consumption 3.2 mA

Operating Voltage         48 V ± 4 V

Length  5.71" / 145 mm

Diameter           2.52" / 64 mm

Weight  15.70 oz / 445 g

Neumann TLM 107 Multi-Pattern Large Diaphragm Condenser Microphone (Nickel)

Packaging Info

Package Weight            2.75 lb

Box Dimensions (LxWxH)          10.4 x 5 x 3.9"

Neumann EA 4 Elastic Suspension Shockmount (Nickel)

Packaging Info

Package Weight            1.025 lb

Box Dimensions (LxWxH)          7.15 x 6.4 x 4.1"

What’s In The Box

- Neumann TLM 107 Multi-Pattern Large Diaphragm Condenser Microphone (Nickel)

- Neumann SG 2 Stand Mount (Black)

- Wooden Box

- Neumann EA 4 Elastic Suspension Shockmount (Nickel)

- Thread Adapter for 1/2"- and 3/8" Stands

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry