Product Name | DVA T8 BLK |
---|---|
Brand | DB TECHNOLOGIES |
Sale Price | Php 230,000.00 |
Mileage | Points :2,300.00 |
수량 | |
Product Code | P0000GTC |
Product Details | 8-inch Active Line Array Module - Black (1 pc) |
QR Code |
Product promotion via SNS |
|
---|
Shipping Cost Payment Options: 1."To be Paid on Delivery" Shipping is still limited to some areas in Visayas and Mindanao via AP Cargo.Shipping Cost may be paid by cash to courier (door-to-door) or upon branch pick-up. Service may expand nationwide in the nearfuture; 2."Pre-pay" Shipping covers countrywide (Philippines). Shipping cost needs to be settled with the item cost prior to shipping of the package. Product Availability: Some products are provided on a per order basis and could take 3-5 weeks to be available upon order.Kindly inquire for the availability of the items. |
(Minimum Order : 1 or more / Maximum Order 0 or less)
Size Charts
Overview:
DB TECHNOLOGIES DVA T8 is the latest and most advanced incarnation of a string of successful line array systems that started with the DVA T4.
Main Features:
Top Performance Paired with Total Control
Precise directivity
High-definition top end
Accurate, awesomely efficient midrange response
Extended low-end performance
Easy Setup -Configuration at the touch of a button
DVA T8 and DVA T12 series housing are acoustically and mechanically compatible.This means DVA T12 units ma be flown right above a T8 array for use as far-fills.
Rear Panel Features:
CONTROLS AND FUNCTIONS
1) " INPUT” INPUT CONNECTOR - Balanced input at line level. It is able to accept “XLR” sockets.
2) "LINK” OUTPUT CONNECTOR - The “XLR” connector connected in parallel with input (1) can be used to send the input audio signal to another amplified speaker.
3) “LIMITER” INDICATOR LIGHT - This indicator comes on red to indicate that the internal limiter circuit has tripped. This prevents amplifier distortion and protects the speakers against overloads.
4) “SIGNAL” INDICATOR LIGHT - This indicator comes on green to indicate the presence of an input signal to a level higher than-20dBu.
5) “MUTE/PROT” INDICATOR LIGHT - This yellow indicator indicates amplifier status. In normal operating conditions, the LED is off; if it flashes or is always on, refer to the diagnostics table to check amplifier status.
6) “READY” INDICATOR LIGHT - This indicator comes on green to indicate that the main power voltage is correct. In normal operating conditions, the LED is on; if it flashes or is off, refer to the diagnostics table to check amplifier status.
"Input control " section
7) “INPUT SENS” INPUT SENSITIVITY CONTROL- This control regulates the sensitivity of the signal amplifier input.This control does not affect the “BALANCED LINK/OUT” output level
8) INPUT CONNECTOR "DATA INPUT” - RJ45 connector 'data input.
9) OUTPUT CONNECTOR "DATA INPUT” - RJ45 connector 'data output for cascading connections.
10) “LINK” INDICATION LIGHT - This green indicator turns on only when the amplifier has recognized and is connected with the main RDNET unit via the computer.
11) “ACTIVE” INDICATOR LIGHT - This yellow indicator flashes when there is an active data transmission between RDNET and the amplifier module.
12) “Remote Preset Active” INDICATION LIGHT - This yellow indicator indicates the exclusion of the Volume control and the “DSP Preset” rotary switch (13) when the amplifier is remotely controlled by a
computer via RDNET.
13) “DSP Preset” 10-position ROTARY SWITCH - This 10-position rotary switch makes it possible to select the nine preset equalization curves (selector 0-8) or to select the equalization previously saved by the user via RDNET (selector 9).
14) “Service Data USB” Connector - Via this USB connector, it is possible to update the firmware of the DVA T8 amplifier module using the computer and a dedicated program.
15) "MAINS INPUT" POWER SOCKET - For connecting the power cable.The connector used for mains connection is a POWER CON® (blue)
16) “MAINS OUTPUT LINK” RELAUNCH POWER SOCKET - For relaunching the mains power. The output is connected in parallel with input (15) and can be used to power another amplified speaker. The connector uses a POWER CON® (grey)
17) "MAINS FUSE" FUSE CARRIER - Mains fuse housing.
Specifications:
1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)
2. Payment via PayPal account : PayPal verified account is required.
3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.
4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.
5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)
For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.
*Important: All Prices in the website are subject to change without prior notice
Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
Covered destinations : Nationwide
Shipping cost : may vary on destination and purchase amount
Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
Shipment bound for EMS premium regions : The customer may be required to pay additional cost.
*Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.
International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.
Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.
Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
- Sold out products
- Wrong item delivered
- Defective products
- Shoddy Goods
Ineligible for returns and exchanges:
- Products with customer-induced damages
- Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
- Change of mind
* (Please contact us or Email customer service for details)
Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.
The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects.
The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.
>Warranty
channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.
If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.