Product Details

Overview:

MARTIN AUDIO OmniLine® delivers consistent audio coverage with unprecedented accuracy in a wide variety of architectural environments, using only one amplifier channel per array in many applications. By utilising a complement of unique, Martin Audio designed drivers, and mechanical alignment techniques, simple EQ and Limiting is the only processing required. A powerful software application provides extremely accurate intercabinet and array angles, in order to achieve optimum coverage over a predefined area. OmniLine's aesthetically pleasing cabinet is finished in neutral light grey.

Each OmniLine array is constructed by connecting together multiple array modules. Up to 32 modules can be connected where both high output and vertical focussing down to low/mid frequencies are required. Smaller numbers of modules (down to 4) can be used for shorter-throw applications, where vertical focussing of these frequencies is less important.

Rather than applying DSP to a traditional column, OmniLine’s vertical beam-forming is achieved by physically articulating individual array modules to curve the array. The actual array configuration for a specific venue is determined by powerful, patent pending optimisation software which makes intelligent judgements about the ‘goodness’ of the array’s SPL distribution against objective target functions.

• OmniLine uses a line of five custom-designed dome tweeters, with a spacing of only 21mm between each element. The result is sidelobe-free vertical dispersion from the high frequency section.
• The ‘cones’ of the custom-designed LF drivers are sculpted from an ultra-light, stiff material and precisely follow the ideal contour of the HF horn walls (patent pending). This provides constant horizontal directivity from low mid, right up to extreme high frequencies.

Sidelobe Free

• OmniLine uses a line of five custom-designed dome tweeters, with a spacing of only 21mm between each element. The result is sidelobe-free vertical dispersion from the high frequency section.
• Compare this to using off-the-shelf 1" (25mm) dome tweeters. Sidelobes as loud as the main (red) lobe appear at frequencies as low as 8kHz; well within the audio band

LF drivers

The “cones” of the LF drivers are sculpted from an ultra-light, stiff material and precisely follow the ideal contour of the HF horn walls (patent pending). This provides constant horizontal directivity from low mid, right up to extreme high frequencies.

• Conventional cross-firing driver configurations typically yield non-optimal HF horn profiles, which causes significant disturbance to HF dispersion that also varies with frequency.
• In short, anything but constant directivity!

Modular construction

• Each array is constructed in multiples of 4 modules to make up arrays of 4, 8, 12, 16, 24 or 32 modules.  Resultant array lengths are 0.47m, 0.94m, 1.4m, 1.9m, 2.8m and 3.7m respectively.

Inter-cabinet connection

• Inter-cabinet angles are set via captive, rear-mounted brackets and linking plates. Angles of 0° to 5° are set in 1° steps by fitting two pin clamps into the respective holes in each cabinet’s bracket. Once each angle is set, an orange ‘safety clip’ is fitted to lock the pin clamps in place.
• Finally the rear covers are fitted to maintain the sleek, unobtrusive appearance required of an architectural loudspeaker product.

Deployment

• Arrays can be wall mounted or flown via optional brackets.They are designed to be unobtrusive and adaptable in order toblend in with their environment.

Wall mounting

• Up to 16 cabinets can be wall mounted using the optional brackets. Pan and tilt are easily achievable. Arrays can be panned left or right and then the bracket locked in position. Tilt is achieved by setting the length of a wire rope or chain‘pull-back’ strap, allowing accurate on-site adjustment of array aiming. The brackets are designed as 1st/2nd fix components in accordance with typical installation methods.

Applications

• Churches, Museums, Sports venues, Conference centres,
• Theatres, Auditoria, Shopping malls, Transport terminals,
• Concert halls, Bars, Restaurants, Lecture theatres

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry