HPS 2500

Current Page

HPS 2500

(International shipping available)

Basic Information
Product Name	HPS 2500
Brand	RCF
Sale Price	Php 64,000.00
Mileage	Points :640.00
수량
Product Code	P0000HWZ
Product Details	Power Amplifier (1,100W)
QR Code

Product promotion via SNS
Product promotion via SNS

To use or earn Naver Mileages, please check out through personal payment window.

Product Option

Shipping Cost Payment Options:
1."To be Paid on Delivery" Shipping is still limited to some areas in Visayas and Mindanao via AP Cargo.Shipping Cost may be paid by cash to courier (door-to-door) or upon branch pick-up. Service may expand nationwide in the nearfuture;
2."Pre-pay" Shipping covers countrywide (Philippines). Shipping cost needs to be settled with the item cost prior to shipping of the package.
Product Availability:
Some products are provided on a per order basis and could take 3-5 weeks to be available upon order.Kindly inquire for the availability of the items.

(Minimum Order : 1 or more / Maximum Order 0 or less)

Size Charts

information Select quantity.

information To add product, select an option in the above option box.

Product List
Name	Quantity	Price
HPS 2500		( 640)
Total(Quantity) : 0 (0 item)

Product Details

Overview

RCF HPS 2500 is a 2 channel power amplifier that delivers up to 2 x 1400 W RMS @ 2 Ω (2800 W RMS bridged @ 4 Ω).

XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.

Features:

Fast response and low distortion
Easy to configure in stereo / mono / bridge modes
Extensive protective circuits ensure high reliability and operating safety
Front panel signal / clip / protect LED indicators
Minimum load impedance (stereo / mono): 2 Ohm
XLR input connectors
SPEAKON output connectors
2 unit 19" rack, low weight for easy transportation
Switchable Limiter

Applications:

Professional touring racks
Installed Sound Systems

Front Panel Features:

1.) Channel level control (one per channel).

It is a 41 step control to adjust the output level of the respective amplifier channel.Turn clockwise to increase the output level (0 dB = max. level); turn counterclockwise to decrease.

2.) LED bar (one per channel)

8 step signal level meter (-36 dB, -24 dB, -18 dB, -12 dB, -9 dB, -6 dB, 0 dB).
Clip / limiter LED - When lit, it indicates the clipping point and the internal limiter intervention on the respective channel. If it stays lit continuously, the input signal level is excessive.
Protection LED - When lit, it indicates the internal protection intervention (due to overload, short-circuit, thermal drift, fault). The respective channel is muted.
The normal operation will be automatically restored as soon as the problem is solved.

3.) Power LED - When lit, it indicates that the amplifier is switched on and operating.

4.) Bridge LED - When lit, it indicates that the amplifier is set to the ‘bridge’ mode.

5.) Power switch (I = ON; 0 = OFF)

6.) Air intakes with grilles and filters

Rear Panel Features:

7.) Balanced audio input (one per channel, female XLR connector)

8.) Balanced parallel audio output (one per channel, male XLR connector) This output provides a copy of the signal present on the respective channel input and it is useful to link other amplifiers.

9.) Internal limiter on / off switch (one per channel)

ON: the internal limiter ensures the proper amplifier channel operation (even if the input signal is too high) and protects loudspeakers against potentially damaging distorted output signals.
OFF: the internal limiter is disables in the respective channel.

10.) Input sensitivity / voltage gain selector (one per channel)

Available options are: 1.4 V (input sensitivity), 32 dB / 26 dB (voltage gain).

Use this switch to match the amplifier input sensitivity / voltage gain to other connected equipments.

1.4 V : this setting set to 1.4 V the input level required to get the maximum power output from the amplifier (use this setting for standard operation, with no ‘system controllers’).
32 dB: the amplifier voltage gain is fixed to 32 dB (output / input ratio will always be 32 dB, no matter what the input and the rated output power of the amplifier are).
26 dB: the amplifier voltage gain is fixed to 26 dB.

11.) Amplifier mode selector - Before turning the amplifier on, set the amplifier mode selector to the right position among BRIDGE, STEREO and PARA (mono)

12.) Amplifier output to loudspeakers (SPEAKON connector, one per channel)

In stereo and mono modes, both outputs can be connected; in ‘bridge’ mode, connect the output 1 Only

13.) Power cable input - Connect the power cable only to a mains socket outlet with a protective earthing connection

14.) Openings for heated air exit. - Do not obstruct these openings !

Operation Modes:

STEREO MODE

Ensure the amplifier is switched off, then set the MODE selector to STEREO.

In stereo mode, the 2 channels operate independently and each front panel level control affects the respective output.

Minimum nominal load impedance is: 2 Ω per output (HPS 2500) / 4 Ω per output (HPS 1500).

Loudspeakers can be connected to either the SPEAKON output 1 (left channel) or 2 (right channel).

MONO MODE

Ensure the amplifier is switched off, then set the MODE selector to PARA.

In mono mode, both channels are linked to input 1 (therefore receiving the same signal).

Each front panel level control affects the respective output, allowing you to set (if necessary) different levels.

Minimum nominal load impedance is: 2 Ω per output (HPS 2500) / 4 Ω per output (HPS 1500).

Loudspeakers can be connected to either the SPEAKON output 1 or 2.

BRIDGE MODE

Ensure the amplifier is switched off, then set the MODE selector to BRIDGE.

In ‘bridge’ mode (mono), both amplifier channels work with the same input signal, but with

inverse phases. The result is a doubling of the output voltage in order to get a double power (on a

double impedance load).

Both level controls (on the front panel) must be set to the same value (it is advisable to set them to the max. level: 0 dB).

Only the input CH1 is to be used; only the amplifier output 1 is to be connected (pay attention to the

SPEAKON pins: 1+ positive, 2+ negative).

Minimum nominal load impedance is: 4 Ω (HPS 2500) / 8 Ω (HPS 1500).

Technical Specifications:

AMPLIFIER SPECIFICATIONS

Power output stereo 2Ω:.......................2 x 1400 W rms
Power output stereo 4Ω:..................2 x 1100 W rms
Power output stereo 8Ω:......................2 x 700 W rms
Power output bridged 4Ω:...................2800 W rms
Power output bridged 8Ω:.............................2200 W rms
Frequency Response +/- 0.25 dB:................20 Hz ÷ 20 kHz
Signal/noise rate:......................................106 dB
Damping factor:..........................................> 500
Slew rate:..........................................50V/μS

INPUT SECTION

Input connector:....................XLR
Input sensitivity:..................1.4 dBm/V RMS
Input impedance:.....................20 kΩ (balanced), 10 kΩ (unbalanced) kΩ

OUTPUT SECTION

Output connector:..................Speakon

SYSTEM PARAMETERS

Cooling:.......................Forced
Voltage gain......................................:32 – 26 dB
Amplifier class:.............................H

POWER REQUIREMENTS

Operating voltage:......................220 ÷ 240 V (50 / 60 Hz) V ~ Hz

PHYSICAL SPECIFICATIONS

Height:..................88/3.4 mm/inch
Width:.......................482/18.9 mm/inch
Depth:.........................420/16.5 mm/inch
Net Weight:.....................19/41,8 kg/lbs

Product Details
Help
Reviews
Q&A
Related Items

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
Covered destinations : Nationwide
Shipping cost : may vary on destination and purchase amount
Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
Shipment bound for EMS premium regions : The customer may be required to pay additional cost.
*Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

Returns & Exchanges

Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
- Sold out products
- Wrong item delivered
- Defective products

- Shoddy Goods

Ineligible for returns and exchanges:
- Products with customer-induced damages
- Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
- Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects.

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.