Product Details

Overview

These compact cabinets are designed for vertical or horizontal use (including stage monitor use), with rotatable horns to tailor dispersion to the application.

• Stacked on a sub woofer, mounted on a pole, flown (using the factory fitted Penn-Elcom flying points) or at your feet as a high power monitor, the Tessen MP range is the ideal compact and flexible sound reinforcement solution for your live or install needs.
• Easily portable, but discreetly styled for install. Tessen MP will fulfil your requirements.

Technologies:

PA WOOFERS

• Many aspects must be considered in PA woofer design: Is it for a sub or a front-of-house cab? If front-of-house, what compression driver will it be used with? What size and type of cabinet must it suit? How many drivers will be in the cab? When all this is considered, it is clear why designing and building our own speakers is a great advantage.
• FOH woofers must have enough high mid to match the compression driver used, but must reproduce enough bass to work without a sub. Subwoofer drivers must be able to shift a lot of air without suffering mechanical damage, or becoming non linear, and also should not reproduce much mid, which would need to be rolled out by expensive X-over components.

TESSEN RANGE SPEAKERS

• All Tessen systems have cast frame, designed-for-purpose woofers with highly efficient ribbon wire coils, massive magnet structures and glass-fibre reinforced felted cones with long excursion surrounds. Cones are manufactured to our specification by world renowned U-Sonics Power Cone and specially imported for Tessen cabs. The glass fibre reinforcement greatly enhances the stiffness of the cones without compromising weight, and provides the correct tonal character and smoothness to seamlessly blend with the large format 1.4” exit compression drivers used in all Tessen high/mid cabs. The 1.4” exit / 50mm Titanium dome compression drivers give a smoother, clearer upper mid character for superb vocal reproduction with great projection and very high power handling

TOTAL SYSTEM DESIGN

• Unlike many of our competitors, we design and build every part of our products. Speakers, electronics, cabinets and other parts are all designed and refined together to make a system; every part is fine tuned in development to work in harmony with the others resulting in performance far greater than the sum of the parts

FRONT OF HOUSE

• The main PA facing the audience is the vital link between your talent and your audiences perception. Your front-of-house cabs carry your message. Loud isn’t enough ; detail, clarity, responsiveness and even subtlety are essential. Your speakers should be good enough that nobody even notices they exist. By fine tuning every detail to work together our PA will put the focus on you, not your speakers. Understated looks with robust build and components sourced from the best suppliers after extensive testing combine to give outstanding acoustic performance.

ACTIVE FRONT OF HOUSE

• HH Active front-of-house cabs use our proprietary Biamp electronics. A high efficiency, lightweight switch-mode power supply drives a Class D low/mid frequency amplifier rated conservatively at 500W (RMS @ 4 ohms), and a 50W Class A/B high frequency amp to give high sound pressure levels with dynamics, headroom and clarity. The inbuilt active X-over includes EQ and phase correction to perfectly match the drivers. The input panel includes features a balanced line input and link output, level control, preshape switch, and indicator LED’s for clipping and protect. Mixing and EQ are left to your mixer and outboard, where they should be. Our active cabs just make your sound louder.

CABINET DESIGN

• Good Engineers realise that you can’t create a perfect design on a computer. After optimising the theoretical cabinet acoustics we build and extensively test samples. During testing braces, handles, pole mount fittings, ports and drivers may all be moved or altered. Sometimes just a few millimetres make a big difference to overall performance. Bracing the cabinet in the right place costs no more than a brace in the wrong place, but greatly improves clarity. A few days of extra testing and cabinet building is justified by the result.

Features:

• Equally at home as a high-powered stage monitor or FOH pa cabinets the TMP-112A offers a full range, remarkably transparent audio signal.
• This Bi amped active cabinet features a 500W Class D amplifier with switch mode power supply and EQ pre shape, plus a 1.4” exit compression driver on a rotatable horn combined with a new cast frame 12” driver designed specifically for the Tessen MP range.
• Rubber feet, 35mm pole mounts and 12 industry standard Penn-Elcom M10 flying points make the TMP-112A ideal for installation applications.

Specifications

Product Type.....................Biamped Active 2 way Multi-Purpose PA system

Sensitivity (1W@1m)..........97dB

Max SPL (calc)...................124dB

Connections........................Jack and XLR combi input, XLR link output. All balanced.

Controls...........................Volume, preshape EQ switch

Finish..............................Hardwearing black spatter paint

Grille...................................heavy gauge steel with acoustic foam front

Handles...............................1 x top mounted bar handle

Pole mount fitting.................35mm steel

Dimensions (HxWxD) (mm)............. 596 x 360 x 400mm

Amplifier type............................Class D (LF), Class A/B (HF)

Power Supply........................... Lightweight Switch Mode

Max Power Consumption............650W

Power RMS.............................. 500W (LF) + 50W (HF)

Power prog................................1000W

Power Peak..............................2000W

Input Sensitivity...................... 0dBu Nominal (+6db Gain)

Protection.............................Comprehensive protection circuitry and clip free limiting

Cooling ............................Convection via external heatsink

Frequency response (-3dB).........70 - 20kHz

Frequency response (-10dB) ..........50 - 22kHz

Tweeter ..................................... HH GT-539D 1.4" exit compression driver

Horn dispersion (H x V°) .............90 x 60 (rotatable)

Xover Freq .................................. 2.4kHz

Xover Type/Slope........................18dB/Octave Linkwitz-Reilly Active filters

Cabinet material............................15mm MDF

Cabinet taper (trap / wedge).........50° (wedge angle)

Feet ...........................................Custom recessed low profile HH rubber feet

Mounting Points.......................... Industry Standard Penn Elcom M10 x 12

Packed Weight  ...........................25 Kg

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry