Product Details

VM 3360VA 

360W Voice Alarm System Amplifier 

Overview

The VM-3360VA is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with audio inputs including the background music input, and the speaker output section which has an internal attenuator and 6-output selector. It permits not only general-purpose broadcast, but also Emergency broadcast based on the EN60849 Standard which gives pre-recorded voice instructions in the emergency situation. Emergency broadcast can be made from an optional RM-300MF Fireman's Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features the surveillance function which automatically checks the system for failures. 

Specifications

Power Source230 V AC, 50/60 Hz

Power Consumption850 W (with rated output signal), 380 W (according to EN60065)

Rated Output360 W

Frequency Response50 Hz - 20 kHz, ±3 dB (at 1/3 rated output)

Distortion0.7 % or less (at rated output, 1 kHz)

S/N Ratio85 dB or more

Audio Input/Output CharacteristicSampling frequency: 48 kHz

A/D D/A converter: 24 bit

InputInput 1 - 3: -50 dB* (MIC)/-10 dB* (LINE) (changeable), 600 Ω,

electronically balanced, combined XLR connector (female)/phone jack

Input 4: -50 dB* (MIC)/-10 dB* (LINE) (changeable), 600 Ω, electronically balanced,

removable terminal block (14 pins)

BGM 1 - 2: -10 dB*, 10 kΩ, unbalanced, RCA pin jack

External amplifier input: 100 V line, removable terminal block (14 pins)

OutputSpeaker output 1 - 2: Max. (360 W) per output

Speaker output 3 - 6: Max. (120 W) per output

Speaker output 1 - 6: Total within 360 W, removable terminal block (14 pins)

Allowable minimum load: 500 Ω (20 W) at 100 V line for speaker line failure detection

Direct output: Direct output from internal or external amplifier,

removable terminal block (16 pins)

Recording output BGM/Paging: 0 dB*, 10 kΩ, unbalanced, RCA pin jack

RM LinkInput 1 - 2: Connecting the RM-300MF/RM-200M Remote Microphone.

RJ45 female connector

Maximum distance: Total 800 m (874.89 yd) between this unit and remote microphones

Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

Network I/F10BASE-T / 100BASE-TX (selectable by automatic negotiation), RJ45 female connector

Maximum distance: 100 m (109.36 yd) between this unit and a switching hub

Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

VM LinkOutput: Connecting the VM-3240E or VM-3360E, RJ45 female connector

Maximum distance: 800 m (874.89 yd)

Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

EXT PA LinkConnecting the VP-2421, RJ45 female connector

Maximum distance: 5 m (16.4 ft)

Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

General ControlInput 1 - 8: No-Voltage make contact input, open voltage: 24 V DC,

short-circuit current: 2 mA or less, removable terminal block (14 pins)

Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC,

operating current: 10 mA or less, removable terminal block (14 pins)

Emergency ControlInput 1 - 5: No-Voltage make contact input, open voltage: 24 V DC,

short-circuit current:2 mA or less, RJ45 female connector

Input 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %,

RJ45 female connector

Status out: Relay contact output, withstand voltage: 40 V DC,

operating current: 2 - 300 mA, RJ45 female connector

ATT ControlRelay contact 1-6, 125 V AC or 30 V DC, total under 5 A,

removable terminal block (16 pins)

Power Input/OutputPower in: Connecting the VX-2000DS only (operating range: 20 - 40 V DC)

PS out: 28 V DC/24 A

M4 screw terminal, distance between barriers: 11 mm (0.43")

DC24V Output24 V DC, Maximum feeding current 0.3 A

Ds LinkConnecting the VX-2000DS, RJ45 female connector

Maximum distance: 5 m (16.4 ft)

Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

Operating Temperature-5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)

Operating Humidity5 % to 95 %RH (no condensation)

FinishPanel: Aluminum, hairline, black

Case: Surface-treated steel plate, black, paint

Packaging Info

Dimensions482 (W) × 132.6 (H) × 431.2 (D) mm (18.98" × 5.22" × 16.98")

Weight19 kg (41.89 lb)

What’s In The Box

• Power cable (2 m (6.56 ft)) 

• Setting software-CD 

• Link cable (3 m (9.84 ft)) 

• Plastic foot 

•  Plastic foot mounting screw 

•  Removable terminal plug (14 pins)

• Removable terminal plug (16 pins) 

• Emergency microphone (hand-held type)

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry